Cisco Catalyst 3560 Getting Started Manual page 13

Cisco systems switch getting started guide

Hide thumbs Also See for Catalyst 3560:

Table of Contents

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take

special precautions to ensure that the system remains stable. The following guidelines

are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top

with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or

servicing the unit in the rack. Statement 1006

Warning

This equipment is intended to be grounded. Ensure that the host is connected to earth

ground during normal use. Statement 39

Warning

If a redundant power system (RPS) is not connected to the switch, install an RPS

connector cover on the back of the switch. Statement 265

Warning

Class 1 laser product. Statement 1008

Table of Contents

Show Quick Links

Table of Contents