Chapter 3 Troubleshooting; Understanding Post Results; Clearing The Switch Ip Address And Configuration - Cisco Catalyst 3550 Hardware Installation Manual
Cisco systems multilayer switch user manual
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (794 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
Troubleshooting
This chapter describes these troubleshooting topics:
•
•
•
Understanding POST Results
While the switch powers on, it automatically begins POST, a series of tests that verifies that the switch
functions properly. POST lasts approximately 1 minute. When the switch begins POST, the port LEDs
turn green, the system LED blinks green, the RPS LED turns off, and then the first two port LEDs turn
off. When POST completes, the port LEDs return to the status mode display, and the system LED is
green. If POST fails, the system LED is amber, and the port LED associated with the test is amber.
If POST fails, the SYST LED turns amber.
failure. POST failures are usually fatal. Contact your Cisco representative if your switch does not pass
POST.
The LEDs on a Catalyst 3550-24PWR switch function differently during POST. Use the console port to
Note
view the POST results.
Clearing the Switch IP Address and Configuration
If you have configured a new switch with a wrong IP address, or if all the switch LEDs start blinking
when you are trying to enter Express Setup mode, you can clear the IP address that is configured on
the switch.
Note
This procedure clears the IP address and all configuration information stored on the switch. Do not
follow this procedure unless you want to completely reconfigure the switch.
To clear the IP address and the switch configuration information, follow these steps:
Step 1
Press and hold the Mode button.
OL-6155-01
Understanding POST Results, page 3-1
Clearing the Switch IP Address and Configuration, page 3-1
Diagnosing Problems, page 3-2
C H A P T E R
Table 3-1 on page 3-3
lists causes and resolutions for a POST
Catalyst 3550 Switch Hardware Installation Guide
3
3-1
Hide quick links:
Advertisement
Table of Contents
