Chapter 2 Switch Installation - Cisco Catalyst 3550 Hardware Installation Manual
Cisco systems multilayer switch user manual
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (794 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
Preparing for Installation
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. Statement 43
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury
Warning
and equipment damage. Statement 48
The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device. Statement 66
Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth ground during
normal use. Statement 39
To prevent the switch from overheating, do not operate it in an area that exceeds the maximum
Warning
recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least
3 inches (7.6 cm) of clearance around the ventilation openings. Statement 17B
When installing or replacing the unit, the ground connection must always be made first and
Warning
disconnected last. Statement 1046
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
If a redundant power system (RPS) is not connected to the switch, install an RPS connector cover on
Warning
the back of the switch. Statement 265
To comply with safety regulations, mount switches on a wall with the front panel facing up.
Warning
Statement 266
Catalyst 3550 Switch Hardware Installation Guide
2-2
Chapter 2
Switch Installation
OL-6155-01
Hide quick links:
Advertisement
Table of Contents
