Table of Contents
Advertisement
3.1 Programming Data Entry
Programming can be accomplished using the FACP keypad or by connecting an optional standard
computer keyboard. The keyboard can be connected to the PS-2 connector J7 on the control panel
main circuit board.
Local or remote programming and editing can also be accomplished using the DACT-UD2 Digital
Alarm Communicator/Transmitter which is optional for the MS-9600LS and supplied standard
with the MS-9600UDLS. Refer to the DACT-UD2 Manual P/N 53037 for detailed information.
The information presented in this section refers to programming the FACP via the onboard keypad.
If an optional computer keyboard is connected to the FACP main circuit board, the following table
describes the keyboard keys which correspond to the onboard keypad keys.
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
Section 3: Programming
Keypad Keys
1st Event
CLR
ESC
RECALL
*
#
A - Z
0 - 9
(on QZ key)
—
/
•
ENTER
ACK/STEP
SILENCE
DRILL
RESET
Computer Keyboard Keys
Home
Delete
Esc
Insert
*
#
A - Z
0 - 9
Space bar
—
/
•
Enter
F1
F2
F3
F4
61
Advertisement
Table of Contents
