Table of Contents
Advertisement
Technical Specifications
Table 1
LEDs/Switch
LINK
Green/Off
CRITICAL
MAJOR
MINOR
Off/Yellow
STATUS
Green/Off
FAIL
Off/Yellow
PCMCIA slot 0
PCMCIA slot 1
1
ACO
switch
1. Alarm cutoff switch
Technical Specifications
Table 2
Description
PRE2
PRE2 spare
Weight
Power consumption per module
Related Documentation
Cisco uBR10012 Universal Broadband Router Performance Routing Engine Module
http://www.cisco.com/en/US/docs/interfaces_modules/cable/performance_routing_engine/installation/
guide/pre5096.html
Cisco uBR10012 Router Release Notes
http://www.cisco.com/en/US/products/hw/cable/ps2209/prod_release_notes_list.html
Regulatory Compliance and Safety Information for the Cisco uBR10012 Universal Broadband Router
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/regulatory/compliance/ub10rcsi.html
Cisco Performance Routing Engine (ESR-PRE2) Upgrade Installation
6
LED and Switch Description (continued)
Description
Carrier detected; passing traffic
No carrier detected; not passing traffic
No alarm
Alarm condition
PRE2 is ready.
No power to the PRE2, or it is acting as the redundant PRE2
PRE2 is operating properly
PRE2 disabled by major failure
Flash card in Slot 0 is active
Flash card in Slot 1 is active
Disables the audible alarm
lists technical specifications for PRE2.
Table 2
Technical Specifications
Specification
ESR-PRE2/R
ESR-PRE2=
8.45 lb (3.84 kg)
200 Watts
(682.4 btu per hour)
OL-24535-01
Advertisement
Table of Contents
