Performing Complex Configurations - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual
Cisco systems ce 2000 platform installation and configuration guide
Hide thumbs
Also See for CE 2000 Platform SCE 2000 4xGBE:
- Installation and configuration manual (143 pages) ,
- Installation and configuration manual (142 pages) ,
- Quick start manual (29 pages)
Table of Contents
Advertisement
Performing Complex Configurations
E
XAMPLE
The following example displays a saved configuration file and then restores the file to overwrite
the current configuration.
SCE 2000#more tffs0:system/prevconf/config.tx1
#This is a general configuration file (running-config).
#Created on 19:36:07 UTC THU February 14 2002
#cli-type 1
#version 1
interface LineCard 0
no silent
no shutdown
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
exit
SCE 2000#copy tffs0:system/prevconf/config.tx1 tffs0:system/config.txt
SCE 2000#
Performing Complex Configurations
After you have installed your SCE 2000 platform hardware, checked all external connections,
turned on the system power, allowed the system to boot up, and performed the initial system
configuration, you might need to perform more complex configurations, which are beyond the
scope of this publication.
For further information on system and interface configuration, refer to the following documents:
•
•
SCE 2000 4xGBE Installation and Configuration Guide
7-10
:
Cisco Service Control Engine (SCE) Software Configuration Guide
Cisco Service Control Engine (SCE) CLI Command Reference
Chapter 7
Basic SCE 2000 Platform Operations
OL-7824-02
Advertisement
Table of Contents
Troubleshooting
