Table of Contents
Advertisement
The Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) WAN interface cards are shared
between the Cisco 1600, 1720, 2600 and 3600 Series Routers. Each card supports a single ISDN BRI port
offered with and without the NT1 interface.
The S/T WAN interface card module (WIC−1B−S/T) needs the external Network Termination 1 (NT1) device
whereas the U WAN interface card module (WIC−1B−U) has an internal NT1 device.
Cables
The WIC−1B−S/T interface card requires RJ−45 to RJ−45 straight−through cables (provided by the
customer).
ISDN BRI S/T Port Pinouts
The table below shows the ISDN BRI S/T port pinouts (RJ−45).
1
8 Pin
TE
3
Transmit
4
Receive
5
Receive
6
Transmit
1
Pins 1, 2, 7, and 8 are not used.
2
TE refers to terminal terminating Layer 1 aspects of TE1, TA, and NT functional groups. This applies to the
Cisco 1603 and the ISDN BRI S/T WAN interface card.
3
NT refers to network terminating Layer 1 aspects of NT1 and NT2 functional groups. This applies to the
Cisco 1604 ISDN S/T port.
BRI S/T WAN Interface Card LEDs
The table below lists the BRI S/T WAN interface card LEDs and their meaning.
LED
B1
Active connection on B1 channel
B2
Active connection on B2 channel
OK
ISDN port has established a connection with the central
office switch
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
2
3
NT
Receive
Transmit
Transmit
Receive
Meaning
Polarity
+
+
−
−
Advertisement
Table of Contents
