Advertisement
Quick Links
Advertisement
Related Manuals for AEG NPort 5110
Summary of Contents for AEG NPort 5110
- Page 1 Ethernet Converter Quick Installation Guide for Ethernet / RS232 NPort 5110...
-
Page 2: Hardware Introduction
Ethernet Converter “NPort 5110” series device servers are compact, palm-sized data communication devices that allow you to control RS232 serial devices over a TCP/IP-based Ethernet. Package Checklist Before installing the Ethernet Converter NPort 5110 series device server, verify that the package con- tains the following items: ... - Page 3 Reset Button Press the Reset button continuously for 5 sec. to load factory defaults: Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off.
- Page 4 Hardware Installation Information SAB Cap Attention! Do not dicconnect the green SAB Cap Connecting for power supply and serial port: The reader has to be supplied with 12 to 30V DC. The maximum output power of the power supply has to be 1.2 Watt.
-
Page 5: Software Installation Information
Step 2: Connect the Ethernet Nport 5110 device server to a network. Use a standard straight- through Ethernet cabel to connect to a hub or switch. When setting up or testing thr Ethernet NPort5110 device server, you might find it convenient to connect directly to your computer´s Ethernet port. -
Page 6: Specifications
Specifications: Power Requirements Power Input Vcc: 12 to 30Volt DC Power Consumption Max. 130mA@ 12V, 75mA@ 24V Operating Temperature 0 to 55°C (32 to 131°F) for standard model Operating Humidity 5 to 95% RH Dimensions 130mm x 60mm x 40mm 130mm x 80mm x 40mm (with tophat rail) Serial Line Protection 15KV ESD for serial port...