Advertisement
Quick Links
GE
Security
GE-DSH-73/82 and 82-POE
Managed Switch Installation
Sheet
Package Contents
Thank you for purchasing the GE Security 7/8-Port Fast Ethernet + 2/3-Port
Gigabit TP/SFP Combo Managed Switch. The following Managed Switch model
numbers are covered in this sheet:
•
GE-DSH-73
•
GE-DSH-82
•
GE-DSH-82-PoE
Open the box of the Managed Switch and carefully unpack it. The box should
contain the following items:
•
The Managed Switch x1
•
User's manual CD x1
•
This Installation Sheet x1
•
RJ-45 to RS-232 cable x1
If any item is found missing or damaged, please contact your local reseller for
replacement.
System Requirements
Your switch is designed to operate with a variety of platforms, operating systems
firealarmresources.com
1 of 13
P/N 1069666 • REV 1.0 • ISS 22FEB10
© 2010 GE Security, Inc.
Advertisement
Related Manuals for GE GE-DSH-82
Summary of Contents for GE GE-DSH-82
- Page 1 Security GE-DSH-73/82 and 82-POE Managed Switch Installation Sheet Package Contents Thank you for purchasing the GE Security 7/8-Port Fast Ethernet + 2/3-Port Gigabit TP/SFP Combo Managed Switch. The following Managed Switch model numbers are covered in this sheet: • GE-DSH-73 •...
- Page 2 and network cards. Actual performance will depend on a combination of these components. Differences in performance can occur depending on the versions and types of platforms, operating system and network cards used. The minimum system requirements are: • Clients running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols.
- Page 3 The wire gauge for the terminal block should be in the range between 12 ~ 24 AWG. For the GE-DSH-82-PoE, A 48VDC, 3A power input is required for full PoE load on the PoE. Please connect an external power source to the terminal block that can supply steady power at 48VDC.
-
Page 4: Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to the serial (console) port of the GE-DSH-82 Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. - Page 5 Figure 4: COM1 properties window Logon to the Console Once the terminal has connected to the device, power on the GE-DSH-73, GE- DSH-82 and the GE-DSH-82-PoE Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks for the login user name and password. The factory default password for the login screen is: •...
- Page 6 Figure 5: GE-DSH-73, GE-DSH-82 and the GE-DSH-82-PoE Login screen Note: For security reasons, please change and memorize the new password after this first setup. Passwords must be entered in lowercase letters in the console interface. Configure IP Address The Managed Industrial Switch is shipped with default IP address as following.
- Page 7 Figure 6: IP information screen Configure IP address On the "Switch# " prompt, type "configure" to enter the configuration mode. On the "Switch(config)# " prompt, enter the following command and press <Enter>. As show in Figure 7. Switch(config)# ip address 192.168.1.100 255.255.255.0 192.168.1.1 The previous command would apply the follow settings for the Managed Industrial Switch.
-
Page 8: Telnet Setup
Figure 7: Set IP address screen Repeat Step 2 to check if the IP address is changed. If the IP is successfully configured, the Managed Industrial Switch will apply the new IP address setting immediately. You can access the Web interface of Managed Industrial Switch through the new IP address. - Page 9 Figure 8: RJ-45 connection diagram Enable the Hyper Terminal program. A terminal program is required to make the software connection to the Managed Switch. Windows' Hyper Terminal program is a good choice. Hyper Terminal can be accessed from the Start menu. Click START, then Programs, Accessories and then Hyper Terminal.
- Page 10 Figure 10: The Connect to dialog window Log on to the Console Make sure the device finished booting. Once the telnet has connected to the device, the hyper terminal will display the login request. Then, the following message asks the login user name and password. The factory default password as following and the login screen as following appear.
- Page 11 Web Browser Setup Start Web Management The following shows how to start up the Web Management of the GE-DSH-73, GE-DSH-82 and the GE-DSH-82-PoE Managed Switch. Please note that the Managed Switch is configured through an Ethernet connection, make sure the manager PC must be set on the same IP subnet address.
- Page 12 Figure 12: IP management diagram Login to the Managed Switch Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP address or that you have just changed in the console) to access the Web interface. When the following dialog box appears, please enter the default password "admin"...
-
Page 13: Contact Information
Thank you for purchase GE Security products. You can browse our online FAQ resource at the GE Security website first to check if it could solve you issue. If you need more support information, please contact GE Security support team.