hit counter script

Operate; Blinks While Cruising; Power Trim And Tilt Will Not - Yamaha FL350A Owner's Manual

Hide thumbs Also See for FL350A:
Table of Contents

Advertisement

3. Fuel pump fuse (15 A)
4. Starting switch (30 A)
5. Main switch / PTT switch / Digital electronic
control ECM (Electronic control module) fuse
(20 A)
6. Shift actuator fuse (15 A)
7. Electric throttle valve fuse (10 A)
8. Engine main fuse (60 A)
9. Isolator fuse (60 A)
EMU35400
Power trim and tilt will not operate
If the engine cannot be tilted up or down with
the power trim and tilt because of a dis-
charged battery or a failure with the power
trim and tilt unit, consult your Yamaha deal-
er.
EMU35613
Water separator-alert indicator blinks
while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator blinks,
perform the following procedure.
1.
Stop the engine.
Trouble Recovery
2.
Remove the top cowling.
3.
Disconnect the lead from the holder.
4.
Disconnect the water detection switch
coupler from the holder.
ZMU05893
112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl300aF350aF300aF350a1Fl350a1

Table of Contents