Tilt Limiter; Tilt Support Lever For Power Trim And Tilt Model; Cowling Lock Lever (Turn Type) - Yamaha FL350A Owner's Manual
Hide thumbs
Also See for FL350A:
- Owner's manual (124 pages) ,
- Owner's manual (86 pages) ,
- Owner's manual (108 pages)
Table of Contents
Advertisement
On the twin engine control, the switch on the
control grip controls both outboard motors at
the same time.
On the triple engine control, the switch on the
control grip controls all outboard motors at
the same time.
For instructions on using the power trim and
tilt switches, see pages 78 and 80.
EMU35040
Tilt limiter
This outboard motor is equipped with a tilt
limiter that controls the tilt range.
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU35053
Cowling lock lever (turn type)
To remove the top cowling, turn the cowling
lock levers at the front and side to release
them and lift off the cowling. Reverse this
procedure when reinstalling the top cowling.
When installing the cowling, align the 3 posi-
tions of the grommets to fit the cowling in the
rubber seal.
ZMU05824
Components
ZMU05852
ZMU05853
36
Advertisement
Table of Contents
