Table of Contents
Advertisement
[WIRELESS LAN]
Note
f When [DISABLE] is selected in the [NETWORK] menu → [WIRELESS LAN] (x page 77) and an item other than [WIRELESS LAN] is
selected in [Art-Net] (x page 83), the wireless LAN page on the [NETWORK STATUS] screen is not displayed.
f If the string of SSID exceeds 16 characters, the SSID will be displayed in two lines.
[Art-Net]
Make settings to use the Art-Net function.
1)
Press as to select [Art-Net].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[WIRED LAN]
[WIRELESS LAN]
Note
f Refer to "Setting address for [WIRED LAN]" (x page 83) or "Setting address for [WIRELESS LAN]" (x page 84) for how to set the IP
address.
f If [Art-Net] is set to other than [OFF], the [NETWORK] menu → [WIRED LAN] (x page 76) or [WIRELESS LAN] (x page 77) is
disabled.
Setting address for [WIRED LAN]
1)
Press as to select [Art-Net].
2)
Press qw to select [WIRED LAN].
3)
Press the <ENTER> button.
f The [Art-Net (WIRED LAN)] screen (1/2) is displayed.
4)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
5)
Press as to select [NEXT], and press the <ENTER> button.
f The [Art-Net (WIRED LAN)] screen (2/2) is displayed.
6)
Press as to select [DEVICE IP ADDRESS].
Chapter 4 Settings — [NETWORK] menu
Displays the network information of the wireless LAN set on the projector.
[ANTENNA LEVEL]
[NETWORK]
[CHANNEL]
[SSID]
[AUTHENTICATION]
[EAP]
[ENCRYPTION]
[DEFAULT KEY]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
[MAC ADDRESS]
Disables the Art-Net function.
Uses the Art-Net function with wired LAN connection.
Uses the Art-Net function with wireless LAN connection.
Enter the net setting of the control console to be connected to the projector.
Enter the subnet setting of the control console to be connected to the projector.
Enter the universe setting of the control console to be connected to the projector.
Enter a start address where the projector processes Art-Net.
Displays the signal status of wireless LAN.
Displays the connection method of wireless LAN.
Displays the channel used for wireless LAN.
Displays the string of SSID.
Displays the user authentication method.
Displays the type of EAP.
Displays the encryption method.
Displays the number of the default key.
Displays the status of use of DHCP server.
Displays the IP address.
Displays the subnet mask.
Displays the default gateway.
Displays the address of the primary DNS server.
Displays the address of the secondary DNS server.
Displays the MAC address of wireless LAN.
ENGLISH - 83
Advertisement
Table of Contents
