Canon LV-7545 Owner's Manual page 25
Canon lv-7545: user guide
Hide thumbs
Also See for LV-7545:
- Assembly and installation instructions (1 page) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Display area
Selects area displayed with this projector. Select the resolution at
Display area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.
Display area V
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.
Full screen
Press POINT LEFT/RIGHT button(s) to switch Full screen function to
"On" or "Off." Set "On" to resize the image with 4 x 3 aspect ratio to
fit the screen.
NOTE : Display area (H/V) and Full screen cannot be adjusted when
"1035i (HDTV)" or "1080i (HDTV)" is selected on PC
SYSTEM Menu (P23).
3
Store
To store adjustment parameters, move a red frame pointer to
Store icon and then press SET button. Move a red arrow pointer
to any of Mode 1 to 5 that you want to store to and then press
SET button.
Mode free
To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SET button. Move a
red arrow pointer to the Mode that you want to clear and then
press SET button.
Other icons operates as follows.
Reset
Reset all adjust parameters on adjustment dialog box to previous
figure.
Quit
Closes PC ADJUST MENU.
COMPUTER INPUT
Press SET button at Display
area icon and Display area
dialog box appears.
Press POINT LEFT
/RIGHT button(s) to
adjust value and then
press SET button.
To store adjustment data.
This Mode has parameters being stored.
Vacant Mode
Shows values of "Total dots,"
"Horizontal," "Vertical," "Display
Store icon
area H," and "Display area V."
To clear adjustment data.
Mode free icon
Display area
Close this dialog box.
25
Advertisement
Table of Contents
