hit counter script

Channel Fader - Yamaha M2500 Owner's Manual

Yamaha mixing console owner's manual
Hide thumbs Also See for M2500:
Table of Contents

Advertisement

Available languages

Available languages

L ON/EDIT switch / ON, CHECK indicators
The function of this switch and these indicators will
change depending on the mode of the M2500.
In normal mode
You can use the ON/EDIT switch to turn the monau-
ral input channel on/off. When the channel is
switched on/off, the ON indicator will be lit/dark to
indicate the status. Channels that are switched off will
not send any signals to the GROUP, STEREO,
MONO/C, or AUX buses, but you can still use the
PFL switch (O) to monitor the signal from the
MONITOR OUT jacks or the PHONES jack.
In check mode
When a scene (which contains the on/off state of the
ON/EDIT switches) is selected, the on/off status
memorized in that scene will be indicated by the lit/
dark status of the CHECK indicator. In check mode,
you can also use the ON/EDIT switch to switch the
CHECK indicator between lit/dark. (The current on/
off setting will not be affected.) For details on check
mode, refer to page 32.
1
PHANTOM
+48V
MASTER
INPUT
1-24
PAD
HPF
1-32
1-40
1-48
1-56
(0dB)
(–26dB)
26dB
GAIN
3
2
5
4
6
INSERT I/O
0dB
4 stage EQ
Ø
80
L
CHECK
ON
Control
ON/EDIT
from CPU
M PEAK/NOM/SIGNAL indicators
These three indicators allow you to check the pre-
fader signal level of the monaural input channel.
• PEAK indicator
This will light when the signal exceeds nominal level
by 17 dB.
• NOM (nominal) indicator
This will light when the signal reaches nominal level
(0 dB).
• SIGNAL indicator
This will light when the signal reaches a level 13 dB
below nominal.
N Channel fader
This adjusts the output level of the monaural input
channel signal. This fader affects the level of the sig-
nal that is sent to the GROUP, STEREO, MONO/C,
and AUX (if the PRE switch is off) buses.
O PFL (pre-fader listen) switch
When this switch is on (
be sent to the MONITOR INPUT PFL bus, and can
be monitored from the MONITOR OUT and
PHONES jacks.
M
J
PEAK
NOM
SIGNAL
N
EQ
7
PAN
ST
MONO
PRE
AUX 7-10
Same as AUX 3-6
AUX 11-14
Same as AUX 3-6
PFL
O
), the pre-fader signal will
K
GROUP
AUX
1
3
5
7
1
3
5
7
9
11
2
4
6
8
2
4
6
8
10
12
LCR
AUX1
AUX2
AUX3
AUX4
AUX5
9
8
AUX6
M2500—Owner's Manual
Control panel
MONITOR
INPUT
MASTER
(PFL)
PFL
AFL
13
L R
L R
L
R
L R
14
5

Advertisement

Table of Contents
loading

Table of Contents