Table of Contents
Advertisement
PREPARATIONS > Connecting speakers
How to connect speakers
Connecting the speaker
Connect a speaker cable between the negative (–) terminal of the unit and the negative (–) terminal of the
speaker, and between the positive (+) terminal of the unit and the positive (+) unit of the speaker.
Remove the unit's power cable from an AC wall outlet before connecting the speaker.
c
S P
E A
+ (red)
F R
b
O N
T
d
- (black)
NOTICE
Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into the unit's interior which
(
could result in a short circuit or malfunction of the unit.
Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the speakers.
(
Do not let the bare wires of the speaker cable touch one another.
(
Do not let the bare wires of the speaker cable come into contact with the unit's metal parts (rear panel and screws).
(
1
Remove approximately 10 mm (3/8") of insulation from the ends of the speaker
cable, and twist the bare wires of the cable firmly together.
2
Loosen the speaker terminal.
3
Insert the bare wires of the cable into the gap on the side of the terminal.
4
Tighten the terminal.
This completes the connection.
K E
R S
a
a
66
Advertisement
Table of Contents
