Table of Contents
Advertisement
Initial settings
Selecting digital output
Select the digital output to be output from the optical/coaxial
digital audio output connector of the unit.
1
At the initial settings screen
Press
/
to select "7 Digital Audio Out-
put" and press SELECT.
2
Press
/
to select the preferred item
(1–3) and press SELECT.
When "1 LPCM (DVD)" is selected
Off:
Only linear PCM of 48 kHz/16 bit is output from
the digital audio output connector. During play-
back of the DVD recorded in the linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, no digital audio is
output. (Factory setting)
PCM: During playback of the DVD recorded in the linear
PCM of 48 kHz/20 bit/24 bit or 96 kHz, digital au-
dio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)
When "2 Dolby Digital" is selected
Bitstream: Dolby Digital (AC-3) bitstream (2ch–5.1ch)
is output. (Factory setting)
PCM:
PCM (2ch) of 48 kHz/16 bit is output.
When "3 MPEG" is selected
PCM:
PCM of 16 bit is output. (Factory setting)
Bitstream: Bitstream is output.
3
Press
/
to select the preferred value at
each screen and press SELECT.
The screen at the step 1 is displayed. Press
and press SELECT to return to the initial settings screen.
Also refer to "Common procedures of initial settings" on
page 31.
(Continued on the next page)
Digital Audio Output
1 LPCM (DVD)
Off
2 Dolby Digital
Bitstream
3 MPEG
PCM
0 Exit
to select "0"
POWER
OPEN/CLOSE
*/ I
@STOP
DPLAY
gSTILL/PAUSE
SLOW/
H
I
F
G
SKIP
SEARCH
TITLE
MENU
SELECT
SELECT
ON SCREEN
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
PLAY MODE
REPEAT
A-B
CLEAR
SET UP
DVD
1
3
37
Advertisement
Table of Contents
