BUILT-IN STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Use a chalk to mark on the fabric about
c
5 mm (3/16 inch) from the edge of the
fabric, and then baste it.
5
3
1
2
2
1
2
1
<Seen from the side>
Fold back the fabric inside along the
d
basting.
4
2
5
6
1
1
1
<Seen from the side>
Unfold the edge of fabric, and position the
e
fabric with the wrong side facing up.
5
1
1
1
3
1
1
<Seen from the side>
Remove the flat bed attachment and make
f
free-arm sewing possible.
• For details on free-arm sewing, refer to
"Stitching cylindrical pieces" (Page 25).
31
1 Wrong side of
4
fabric
2 Right side of
fabric
3 Edge of fabric
4 Basting stitching
6
5 5 mm (3/16 inch)
6 Desired edge of
hem
<Thick fabric>
<Normal fabric>
1 Wrong side of
fabric
2 Edge of fabric
3 Basting
3
4 5 mm (3/16 inch)
5 Desired edge of
hem
6 Right side of
fabric
7 Basting point
<Thick fabric>
7
<Normal fabric>
1 Wrong side of
fabric
2 Right side of
4
fabric
3 Basting
4 Edge of fabric
5 Desired edge of
hem
6 Basting point
6
<Thick fabric>
2
<Normal fabric>
Slide the part that you wish to sew onto
g
the arm, make sure that the fabric feeds
correctly, and then start sewing.
1
1 Arm
Set the stitch length to 0, stitch width to
h
the right needle position.
Slowly turn the handwheel toward you
i
(counterclockwise) until the needle has
moved from the right side to the left.
Position the fabric under the presser foot,
j
and then adjust the fabric position until
the needle slightly catches the fold of the
hem when the needle comes to the left
end of the stitch.
1
2 3
1
2
3
Lower the presser foot lever.
k
1 Wrong side of fabric
2 Fold of hem
3 Needle drop point
1 Needle
2 Needle drop point
3 Fold of hem