Cisco NCS 1004 Manual page 6

Hide thumbs Also See for NCS 1004:

Install Two Post Slider into an EIA/ANSI Rack

Install Two Post Slider into an ETSI Rack

Install Four Post Slider into an ETSI rack

Step 3

Insert the chassis (with brackets) onto the sliders assembled on the rack.

Step 4

After the chassis is completely inserted, fasten the chassis with four screws (48-101524-01) on each side of the bracket,

and using a number-2 Phillps screwdriver, tighten them to a torque value of 4.65 N-m.

See

Install Air Filter

Install Two Post Slider into an EIA/ANSI Rack

This procedure has details about installing the two post slider into an EIA/ ANSI rack.

Step 1

Identify the two post slider and adjust the length of the slider (3" to 5").

Slide the inner sliders and adjust the length to mate with the rack surface.

Figure 8: Two Post Slider Identification

Check for marking on the sliders; the right and the left sliders are indicated.

Step 2

Integrate the two post slider with the rack. The procedure for 23" and 19" rack is discussed here:

• 19" rack - the slider can be directly fitted on to a 19" rack. On the front side, insert only the top most screw of the

slider (48-101524-01) and tighten it to a torque value of 4.65 N-m. On the rear side, insert three screws (48-101524-01)

and tighten to a torque value of 4.65 N-m.

• 23" rack - the slider is fitted on to a 23" rack using an adapter (refer the following image). The formed surface must

always face the inner side of the rack post. On the front side of the adapter (towards the chassis), insert only the top

most screw of the slider (48-101524-01) and tighten it to a torque value of 4.65 N-m. On the rear side (towards the

chassis), insert three screws (48-101524-01) and tighten them to a torque value of 4.65 N-m. For the adapter portion

which is towards the rack, all the six screws are fitted on the front and rear side.

Install Cisco NCS 1004

for the air filter installation procedure, before you fasten the chassis to the rack.

Install Cisco NCS 1004

Table of Contents