Cisco 3110 Hardware Installation Manual page 66

Hide thumbs Also See for 3110:

Table of Contents

Ground the Chassis

You need the following items that you provide:

• Wire-striping tool

• Crimping tool

• Grounding cable

• Two star lock washers for the 10-32 x 0.375 inch-screws used to secure the ground lug

• You need the following items from the accessory kit:

Safety Warnings

Warning

Step 1

Use a wire-stripping tool to remove approximately 0.75 inches (19 mm) of the covering from the end of the grounding

cable.

Step 2

Insert the stripped end of the grounding cable into the open end of the grounding lug.

Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide

• Grounding lug #6 AWG, 90 degree, #10 post (part number 332-0608-01)

• Two 10-32 x 0.38-inch screws used to secure the grounding lug (part number 48-0700-01)

Take note of the following warnings:

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor

or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate

electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Statement 1025 Use Copper Conductors Only

To reduce risk of fire, use copper conductors only.

Statement 1046 Installing or Replacing the Unit

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always

be made first and disconnected last.

Rack-Mount the Chassis

Table of Contents

Chapters

Table of Contents

3120 3130 3140