Checking Power Trim And Tilt / Power Tilt System - Yamaha F80A Owner's Manual
Hide thumbs
Also See for F80A:
- Owner's manual (195 pages) ,
- Service manual (80 pages) ,
- Owner's manual (115 pages)
Table of Contents
Advertisement
Maintenance
check that all switches work.
3.
Tilt the outboard motor up and check
that the tilt rod and trim rods are extend-
ed completely.
2
1. Tilt rod
2. Trim rods
4.
Use the tilt support lever to lock the mo-
tor in the up position. Operate the tilt
down switch briefly so the motor is sup-
ported by the tilt support lever.
1. Tilt support lever
5.
Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6.
Activate the tilt-down switch until the trim
rods have retracted completely into the
cylinders.
55
1
7.
ZMU03458
1
8.
NOTE:
Consult your Yamaha dealer if any operation
is abnormal.
ZMU03459
EMU29162
Checking power trim and tilt / power
tilt system
EWM00430
G
G
Activate the trim-up switch until the tilt
rod is fully extended. Unlock the tilt sup-
port lever.
Tilt the outboard motor down. Check
that the tilt rod and trim rods operate
smoothly.
WARNING
Never get under the lower unit while it
is tilted, even when the tilt support lever
is locked. Severe injury could occur if
the outboard motor accidentally falls.
Make sure no one is under the outboard
motor before performing this test.
ZMU04624
ZMU03460
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
