Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
tions.)----------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Schematic Diagram ---------------------------------------------- 2
4 Basic Wiring Diagram------------------------------------------- 3
5 Disassembly and Assembly Instruction ------------------ 4
5.1. Disassembly of Motor Housing------------------------- 4
5.2. Disassembly of Motor Set & Gear Box--------------- 5
5.3. Disassembly of Switch ----------------------------------- 6
5.4. Disassembly of Switch P.C.B. -------------------------- 7
6 Troubleshooting Guide ----------------------------------------- 8
feeding meat (overloaded). ----------------------------- 8
failure to start. ---------------------------------------------- 8
Model No.
MK-MSG1300WTN (QATAR, ETC)
MK-MSG1300WTZ (UAE, SAUDI, KUWAIT)
MK-MSG1300WTQ (RUSSIA, UKRAINE, ETC)
PAGE
screw failure to turn.---------------------------------------8
meat grinding too slow. -----------------------------------8
unusual. ------------------------------------------------------8
motor. ---------------------------------------------------------8
7 Exploded View and Replacement Parts List -------------9
7.1. Exploded View ----------------------------------------------9
7.2. Packing ----------------------------------------------------- 10
7.3. Replacement Parts List--------------------------------- 11
© 2011 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.
Meat Grinder
MK-MG1300WTN
MK-MG1300WTZ
MK-MG1300WTQ
PMMA111136CE
PAGE
Advertisement
Table of Contents
Related Manuals for Panasonic MK-MG1300WTN
Summary of Contents for Panasonic MK-MG1300WTN
-
Page 1: Table Of Contents
7.3. Replacement Parts List--------------------------------- 11 feeding meat (overloaded). ----------------------------- 8 6.2. SYMPTOM : Switch turned on, but A.C. motor failure to start. ---------------------------------------------- 8 © 2011 Panasonic Manufacturing Malaysia Berhad (6100-K). Unauthorized copying and distribution is a violation of law. -
Page 2: Precautions (Strictly Follow These Instructions.)
CAUTION This meat grinder is for household use only. 2 Specifications Destination Qatar, ETC Saudi, Kuwait, UAE Russia, Ukraine, Etc Model MK-MG1300WTN MK-MG1300WTZ MK-MG1300WTQ Power Source AC220V~240V 50/60Hz Motor Power 220W - 240W Protective Device Circuit Breaker AC250 V 1.6 A (4.5s - 7.0s) -
Page 3: Basic Wiring Diagram
4 Basic Wiring Diagram Gear case Motor housing Switch A.C. Motor Brown Blue Power cord Condenser... -
Page 4: Disassembly And Assembly Instruction
5 Disassembly and Assem- Step 3 Open Motor Housing. bly Instruction 5.1. Disassembly of Motor Housing Step 1 Remove 4 screws. Step 2 Remove Locking Knob. -
Page 5: Disassembly Of Motor Set & Gear Box
5.2. Disassembly of Motor Set & Step 3 Detach connectors from Motor Unit. Gear Box Step 1 Pull up Gear box. Step 4 Remove 4 screws. Step 2 Place the Motor Unit as shown in diagram to remove 2 screws. Step 5 Release 2 Rubber Holders. -
Page 6: Disassembly Of Switch
Step 6 Remove Top Gear Cover. 5.3. Disassembly of Switch Step 1 Use small screwdriver to push out the catch as diagram shown. Step 2 Remove Switch. Step 7 Remove Gears Step 3 Desolder the pin to detach wire. Step 4 Remove Micro Switch. Caution When removing Micro Switch, please take note of the catches. -
Page 7: Disassembly Of Switch P.c.b
5.4. Disassembly of Switch P.C.B. Step 1 Remove Switch Cover. Caution When removing Micro Switch, please take note of the catches. Step 2 Remove nut. Step 3 Remove Switch P.C.B.. -
Page 8: Troubleshooting Guide
6 Troubleshooting Guide 6.1. SYMPTOM : A.C. motor interupted when feeding meat (overloaded). Causes Remedy Too hard meat being fed. Take out the hard meat. Too much meat being fed at once. Reduce the meat feed rate. Used for too long continuously. Follow the specified operating time. -
Page 9: Exploded View And Replacement Parts List
7 Exploded View and Replacement Parts List 7.1. Exploded View B10 (C2) MK-MG1300WTN (QATAR) and MK-MG1300WTQ (RUSSIA) except MK-MG1300WTQ (RUSSIA) B10 (S3) MK-MG1300WTZ (UAE, SAUDI & KUWAIT) MK-MG1300WTQ (RUSSIA) B21 B22... -
Page 10: Packing
7.2. Packing Kubbe attachment B Kubbe attachment A except MK-MG1300WTQ (RUSSIA) Cutting Plate Power Cord Housing unit Grinder cap Hopper Food Pusher Grinder head... -
Page 11: Replacement Parts List
7.3. Replacement Parts List 7.3.1. MK-MG1300WTN (QATAR, ETC) Safety Ref. Part No. Part Name & Description Remarks AME04-1072W0 PLUNGER AME03-133-KS HOPPER ALUMINIUM AME01-121 SCREW BODY AME97-121 SCREW (U) AM12C18000 ROTATING CUTTER AM08C18100 CUTTER A AM10C18100 CUTTER C AME02-121 BODY COVER... - Page 12 7.3.2. MK-MG1300WTZ (SAUDI, KUWAIT, UAE) Safety Ref. Part No. Part Name & Description Remarks AME04-1072W0 PLUNGER AME03-133-KS HOPPER ALUMINIUM AME01-121 SCREW BODY AME97-121 SCREW (U) AM12C18000 ROTATING CUTTER AM08C18100 CUTTER A AM10C18100 CUTTER C AME02-121 BODY COVER AMN98-126-W4 COMPLETE SWITCH ASS'Y AMP91J126 CORD UNIT S3 PULG WITH CAP...
- Page 13 7.3.3. MK-MG1300WTQ (RUSSIA, UKRAINE, ETC) Safety Ref. Part No. Part Name & Description Remarks AME04-1072W0 PLUNGER AME03-133-KS HOPPER ALUMINIUM AME01-121 SCREW BODY AME97-121 SCREW (U) AM12C18000 ROTATING CUTTER AM08C18100 CUTTER A AM10C18100 CUTTER C AME02-121 BODY COVER AMN98-126-W4 COMPLETE SWITCH ASS'Y AMP96-126 CORD UNIT C2 PULG...