hit counter script
Lenovo Motorola G7 Power NA Service And Repair Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Cell Phone
  5. Motorola G7 Power NA
  6. Service and repair manual

Lenovo Motorola G7 Power NA Service And Repair Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Motorola G7 Power NA
Motorola G7 Power NA
Level 2 – Service and Repair Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo Motorola G7 Power NA

Summary of Contents for Lenovo Motorola G7 Power NA

  • Page 1 Motorola G7 Power NA Motorola G7 Power NA Level 2 – Service and Repair Manual...

  • Page 2: Revision History

    Motorola G7 Power NA Level 2 – Service and Repair Manual EVISION ISTORY Revision Date Notes Initial Release. Lenovo Confidential Restricted: PAGE 2 Do not share without consent from Lenovo...

  • Page 3: Table Of Contents

    USB Grommet Removal ........................41 Vibrator Removal ..........................42 Primary Mic Grommet Removal ......................43 Secondary Mic Grommet Removal ....................44 Earpiece Speaker Removal ......................45 Battery Removal ..........................46 Lenovo Confidential Restricted: PAGE 3 Do not share without consent from Lenovo...
  • Page 4 Rear-Facing Camera Lens Assembly ....................77 Top Carrier Assembly ........................78 Finger Print Sensor Flex Assembly ....................79 Battery Inlay Assembly ........................80 IMEI Label Assembly ........................84 Sim Tray Assembly ........................... 85 Lenovo Confidential Restricted: PAGE 4 Do not share without consent from Lenovo...

  • Page 5: List Of Tables

    Table 1. External Views Parts List ......................8 Table 2. Assembly Exploded View Parts List ..................9 ABLE OF IGURES Figure 1. External Views ........................7 Figure 2. Assembly Exploded View ...................... 9 Lenovo Confidential Restricted: PAGE 5 Do not share without consent from Lenovo...

  • Page 6: Safety Information

    Ensure screws and screwdrivers do not contact the Battery. Failure to adhere to Safety Critical Note(s) may increase risk of rupture, burning, or failure to function safely when used by the customer. Lenovo Confidential Restricted: PAGE 6 Do not share without consent from Lenovo...

  • Page 7: Introduction

    Motorola G7 Power NA Level 2 – Service and Repair Manual NTRODUCTION External Views Figure 1. External Views Lenovo Confidential Restricted: PAGE 7 Do not share without consent from Lenovo...

  • Page 8: Table 1. External Views Parts List

    Speaker Mesh Front-Facing Flash Display Primary Mic USB Port Volume Key Power Key Camera Deco Rear-Facing Camera Rear-Facing Camera Flash Finger Print Sensor Deco Finger Print Sensor Battery Inlay Lenovo Confidential Restricted: PAGE 8 Do not share without consent from Lenovo...

  • Page 9: Main Exploded Views

    XT1955-5 Batt Cover BE&712601008681_TF XT1955-5 Batt Cover BE&712601008691_VZW XT1955-5 Batt Cover BE&712601008961_1 CS XT1955-5 Batt Cover BE&712601008701 CS WT+715308006441+SIM Tray BE WT+713300340011+FPC WT+715302000821+RF cable WH WT+715302000811+RF cable BL WT+710324100301+ Speaker Lenovo Confidential Restricted: PAGE 9 Do not share without consent from Lenovo...
  • Page 10 WT+712100341041+RF Cable Mylar MDL,CAMR,8MP,OFILM L4H7F80 COB FF 30PIN MDL,CAMR,12MP,OFILM L12AA20 COB AF 30PIN XT1955-5 CamLens Adhesive&711500340771 XT1955-5 Batt Adhesive&711500340811 XT1955-5 BattCover Adhesive&711500341C01 XT1955-5 F-Cover SPK Foam&711500341C11 XT1955-5 R-Cover SPK Foam&711500341C21 Lenovo Confidential Restricted: PAGE 10 Do not share without consent from Lenovo...

  • Page 11: Disassembly And Recovery

    Motorola G7 Power NA Level 2 – Service and Repair Manual ISASSEMBLY AND ECOVERY Disassembly and Recovery Map *Shaded parts may be eligible for parts recovery. Lenovo Confidential Restricted: PAGE 11 Do not share without consent from Lenovo...

  • Page 12: Tools Required For Disassembly

    Motorola G7 Power NA Level 2 – Service and Repair Manual Tools Required for Disassembly The following tools are required to disassemble the Motorola G7 Power NA phone. Description Part # Picture/Drawing Battery Inlay/Display Removal Fixture MR-M2-001 3 mm Allen Wrench...
  • Page 13 Level 2 – Service and Repair Manual Description Part # Picture/Drawing SIM/SD Tray Removal Tool Black Stick Torque Driver Shim 4-00-5L-10000 T5 Torx Bit ESD Mat Wrist Strap Gloves Tweezers (Plastic) Lenovo Confidential Restricted: PAGE 13 Do not share without consent from Lenovo...

  • Page 14: Sim Tray Removal

    Use the SIM Tray Removal pin to push into the SIM Tray hole. Press the SIM Tray Removal pin to make it pop- out as shown. Use fingers to take out the SIM Tray. Lenovo Confidential Restricted: PAGE 14 Do not share without consent from Lenovo...

  • Page 15: Imei Label Removal

    Remove the IMEI Label only if necessary. After you remove it, you cannot reuse it. Use the Plastic Tweezer to remove the IMEI Label from the SIM tray. Lenovo Confidential Restricted: PAGE 15 Do not share without consent from Lenovo...

  • Page 16: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL inside the SIM Tray Slot for signs of activation. Use external light if needed. Lenovo Confidential Restricted: PAGE 16 Do not share without consent from Lenovo...

  • Page 17: Battery Inlay Removal

    Place the phone on the Heating Plate, with the Battery Inlay side down. Wait 10 minutes for the Battery Inlay Adhesive to warm up. Lenovo Confidential Restricted: PAGE 17 Do not share without consent from Lenovo...
  • Page 18 Remove the phone from the Hot Plate or the oven. NOTE Perform the Battery Inlay removal procedure before the phone starts to cool off. //CAUTION// Wear protective gloves when handling heated phones. Lenovo Confidential Restricted: PAGE 18 Do not share without consent from Lenovo...
  • Page 19 Removal Insert in place (if present). Remove the Insert. Orient the Battery Inlay Removal Insert MR-M2- 001-039 in relation to the Display/Battery Inlay Removal Fixture as shown. Place the Insert in the Display Removal Fixture. Lenovo Confidential Restricted: PAGE 19 Do not share without consent from Lenovo...
  • Page 20 Use protective gloves when handling heated phones. NOTE Perform the Battery Inlay procedure before the phone starts to cool off. Place the phone into the press, face down. Lenovo Confidential Restricted: PAGE 20 Do not share without consent from Lenovo...
  • Page 21 Do not insert the Thin Plastic Spudger more than 10 mm to prevent damaging internal components. //CAUTION// Be careful not to bend the Battery Inlay. Damage to the phone may occur. Lenovo Confidential Restricted: PAGE 21 Do not share without consent from Lenovo...
  • Page 22 15. You may need to repeat this process on some suction cups. 16. After all the suction cups have been released, carefully slide the phone out of the Display Removal Fixture. Lenovo Confidential Restricted: PAGE 22 Do not share without consent from Lenovo...
  • Page 23 Split the Battery Inlay from the phone. /// WARNING /// Use care not to disconnect the Finger Print Sensor (FPS) Flex from the Battery Inlay Cover when removing the Rear Housing. Lenovo Confidential Restricted: PAGE 23 Do not share without consent from Lenovo...
  • Page 24 Use the pointed end of the Black Stick to press down and disengage the FPS from the phone. Use fingers to lift the Battery Inlay from the phone. Lenovo Confidential Restricted: PAGE 24 Do not share without consent from Lenovo...

  • Page 25: Screw Tampering Label Inspection

    Inspect the Screw Tampering Labels located on the Top Carrier and Bottom Carrier as shown. Verify they are correctly placed and examine them for signs of tampering. Lenovo Confidential Restricted: PAGE 25 Do not share without consent from Lenovo...

  • Page 26: Top Carrier Removal

    Use the flat end of the Black Stick to lift the Top Carrier from the Rear Housing. Use fingers to disengage the lift up the Top Carrier from the phone. NOTE Be careful with the Finger Print Sensor Flex. Lenovo Confidential Restricted: PAGE 26 Do not share without consent from Lenovo...
  • Page 27 Use the flat end of the Black Stick to remove the Finger Print Sensor BtB Connector from the Main PCB. Use fingers to remove the Finger Print Sensor Flex from the gap on the Top Carrier. Lenovo Confidential Restricted: PAGE 27 Do not share without consent from Lenovo...

  • Page 28: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Main PCB. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 28 Do not share without consent from Lenovo...

  • Page 29: Rear-Facing Camera Lens Removal

    Lens only if it is defective or damaged. After you remove it, you cannot reuse Use the pointed end of the Black Stick to push the Rear-Facing Camera Lens from the Rear-Facing Imager Deco. Lenovo Confidential Restricted: PAGE 29 Do not share without consent from Lenovo...

  • Page 30: Rear-Facing Flash Lens Removal

    After you remove it, you cannot reuse it. Use the flat end of the Black Stick to push out the Rear-Facing Flash Lens from the gap on the Rear Housing. Lenovo Confidential Restricted: PAGE 30 Do not share without consent from Lenovo...

  • Page 31: Main Pcb Removal

    Use the Plastic Tweezer to remove the Coax Cables from the Main PCB as shown. Use the flat end of the Black Stick to gently lift the Main PCB as shown. Lenovo Confidential Restricted: PAGE 31 Do not share without consent from Lenovo...

  • Page 32: Front-Facing Camera Removal

    Foil from the Front-Facing Camera on the Main PCB as shown. Use the flat end of the Black Stick to push out the Front-Facing Camera from the Main PCB. Lenovo Confidential Restricted: PAGE 32 Do not share without consent from Lenovo...

  • Page 33: Rear-Facing Camera Removal

    The Rear-Facing Camera can be recovered and reused after removal. Use the flat end of the Black Stick to gently remove the Rear-Facing Camera from the Main PCB. Lenovo Confidential Restricted: PAGE 33 Do not share without consent from Lenovo...

  • Page 34: Rear-Facing Flash Silicone Pad Removal

    The Rear-Facing Flash Silicone Pad cannot be recovered and reused after removal. Use the Plastic Tweezer to gently peel off the Rear-Facing Flash Silicone Pad from the Main PCB. Lenovo Confidential Restricted: PAGE 34 Do not share without consent from Lenovo...

  • Page 35: Headset Jack Grommet Removal

    Headset Jack Grommet Removal NOTE The Headset Jack Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the Headset Jack Grommet from the Main PCB. Lenovo Confidential Restricted: PAGE 35 Do not share without consent from Lenovo...

  • Page 36: Bb Copper Foil Removal

    BB Copper Foil Removal NOTE The BB Copper Foil cannot be recovered and reused after removal. Use the Plastic Tweezer to remove the BB Copper Foil from the Main PCB. Lenovo Confidential Restricted: PAGE 36 Do not share without consent from Lenovo...

  • Page 37: Pmi Copper Foil Removal

    PMI Copper Foil Removal NOTE The PMI Copper Foil cannot be recovered and reused after removal. Use the Plastic Tweezer to remove the PMI Copper Foil from the Main PCB. Lenovo Confidential Restricted: PAGE 37 Do not share without consent from Lenovo...

  • Page 38: Bottom Carrier Removal

    /// WARNING /// The screws cannot be reused after removal. Use the flat end of the Black Stick to lift the Bottom Carrier. Lenovo Confidential Restricted: PAGE 38 Do not share without consent from Lenovo...

  • Page 39: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Sub board. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 39 Do not share without consent from Lenovo...

  • Page 40: Sub Board Removal

    Use the Torque Driver with T5 Torx Bit to remove the screw as shown. Use the flat end of the Black Stick to remove the Sub Board from the location as shown. Lenovo Confidential Restricted: PAGE 40 Do not share without consent from Lenovo...

  • Page 41: Usb Grommet Removal

    USB Grommet Removal NOTE The USB Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the USB Grommet from the Sub Board as shown. Lenovo Confidential Restricted: PAGE 41 Do not share without consent from Lenovo...

  • Page 42: Vibrator Removal

    After you remove it, you cannot reuse it. Use the flat end of the Black Stick to gently disengage the Vibrator from the Rear Housing as shown. Lenovo Confidential Restricted: PAGE 42 Do not share without consent from Lenovo...

  • Page 43: Primary Mic Grommet Removal

    NOTE The Primary Mic Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the Primary Mic Grommet from the Rear Housing as shown. Lenovo Confidential Restricted: PAGE 43 Do not share without consent from Lenovo...

  • Page 44: Secondary Mic Grommet Removal

    NOTE The Secondary Mic Grommet can be recovered and reused after removal. Use the Plastic Tweezer to gently disengage the Secondary Mic Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 44 Do not share without consent from Lenovo...

  • Page 45: Earpiece Speaker Removal

    Use the flat end of the Black Stick to lift the Earpiece Speaker from the location as shown. Remove the Earpiece Speaker from the phone. Lenovo Confidential Restricted: PAGE 45 Do not share without consent from Lenovo...

  • Page 46: Battery Removal

    Place the phone on the Hot Plate, with the Display side down. Wait 10 minutes for the adhesive to warm up. Lenovo Confidential Restricted: PAGE 46 Do not share without consent from Lenovo...
  • Page 47 Battery. Use the Thin Plastic Spudger to cut the adhesives underneath the Battery from all sides. Use fingers to carefully lift the Battery. Lenovo Confidential Restricted: PAGE 47 Do not share without consent from Lenovo...

  • Page 48: Battery Foam Removal

    Level 2 – Service and Repair Manual Battery Foam Removal NOTE The Battery Foam cannot be recovered and reused after removal. Use fingers to gently remove the Battery Foam from the location as shown. Lenovo Confidential Restricted: PAGE 48 Do not share without consent from Lenovo...

  • Page 49: Coax Cable Removal

    Coax Cables. Coax Cable from the pocket on the recess of the phone. Use fingers to remove the Coax Cables from the recess of the phone. Lenovo Confidential Restricted: PAGE 49 Do not share without consent from Lenovo...

  • Page 50: Main Flex Removal

    Level 2 – Service and Repair Manual Main Flex Removal NOTE After you remove the Main Flex you cannot reuse it. Use fingers to gently peel off the Main Flex as shown. Lenovo Confidential Restricted: PAGE 50 Do not share without consent from Lenovo...

  • Page 51: Parts Refresh

    Motorola G7 Power NA Level 2 – Service and Repair Manual ARTS EFRESH Tools Required for Parts Refresh The following tools are required for parts refresh of the Motorola G7 Power NA phone. Description Part # Image Plastic Tweezers Black Stick...

  • Page 52: Copper Foil Adhesive Cleaning

    Motorola G7 Power NA Level 2 – Service and Repair Manual Copper Foil Adhesive Cleaning Use the ISP Alcohol and Cotton Swabs to remove all the adhesives on the Copper Foil. Lenovo Confidential Restricted: PAGE 52 Do not share without consent from Lenovo...

  • Page 53: Battery Inlay Cleaning

    Use the ISP Alcohol and Cotton Swabs to remove all the adhesives on the Battery Inlay. /// CAUTION /// Remove the adhesive carefully to avoid damage to the Battery Inlay. Lenovo Confidential Restricted: PAGE 53 Do not share without consent from Lenovo...

  • Page 54: Front Housing Refresh

    Motorola G7 Power NA Level 2 – Service and Repair Manual Front Housing Refresh Use the ISP Alcohol and Cotton Swabs to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 54 Do not share without consent from Lenovo...

  • Page 55: Assembly

    Motorola G7 Power NA Level 2 – Service and Repair Manual SSEMBLY Assembly Map Lenovo Confidential Restricted: PAGE 55 Do not share without consent from Lenovo...

  • Page 56: Tools Required For Assembly

    Motorola G7 Power NA Level 2 – Service and Repair Manual Tools Required for Assembly The following tools are required to assemble the Motorola G7 Power NA phone. Description Part # Picture / Drawing Fixture Press Oslo H Inlay Press Adapter...

  • Page 57: Main Flex Assembly

    Use fingers to place and secure the Main Flex on the phone as shown. Use fingers to press down and secure the Main flex in the position as shown. Lenovo Confidential Restricted: PAGE 57 Do not share without consent from Lenovo...
  • Page 58 Motorola G7 Power NA Level 2 – Service and Repair Manual Use fingers to press down and secure the Main flex in the position as shown. Lenovo Confidential Restricted: PAGE 58 Do not share without consent from Lenovo...

  • Page 59: Vibrator Assembly

    XT1955-5 TP LCM ASSY BE&712601008651 CS WT+710613000421+motor dongci Place the adhesive on the Rear Housing and peel off the liner. Use the Plastic Tweezer to place the Vibrator on the location as shown. Lenovo Confidential Restricted: PAGE 59 Do not share without consent from Lenovo...

  • Page 60: Coax Cable Assembly

    Use the Plastic Tweezer to place the protective tape on the Coax Cables. Use fingers to press down and secure the protective tape on the Coax Cables. Lenovo Confidential Restricted: PAGE 60 Do not share without consent from Lenovo...

  • Page 61: Battery Foam Assembly

    Level 2 – Service and Repair Manual Battery Foam Assembly Description Reference # XT1955-5 TP LCM ASSY BE&712601008651 CS ACCY,BAT,ACCY,BAT,5000mAh,JK50,ATL486585 ACCY,BAT,BAT,5000mAh,JK50,ATL486585,ATL, Use fingers to gently place the Battery Foam on the location as shown. Lenovo Confidential Restricted: PAGE 61 Do not share without consent from Lenovo...

  • Page 62: Battery Assembly

    Battery are free of foreign material. Ensure screws and screwdrivers do not contact the Battery. Place the Battery Adhesive on the location as shown and peel off the liner. Lenovo Confidential Restricted: PAGE 62 Do not share without consent from Lenovo...
  • Page 63 10 cycles to secure the Battery on the Rear Housing. NOTE For each cycle roll the Manual Roller from top to bottom of the Battery and vice versa. NOTE Each cycle should last for 3 seconds. Lenovo Confidential Restricted: PAGE 63 Do not share without consent from Lenovo...

  • Page 64: Sub Board Assembly

    XT1955-5 TP LCM ASSY BE&712601008651 CS XT1955 Flash Board&715201008591 CS WT+712300341021+main Mic rubber Use the Plastic Tweezer to place and secure the Primary Mic Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 64 Do not share without consent from Lenovo...
  • Page 65 Use the Plastic Tweezer to place the Sub Board on the location as shown. Use the Torque Driver with T5 Torx Bit to tighten the screw as shown (0.6kgf± 0.05). Lenovo Confidential Restricted: PAGE 65 Do not share without consent from Lenovo...

  • Page 66: Bottom Carrier Assembly

    Use fingers to place the Bottom Carrier onto the Rear Housing, bottom part first. Use the Torque Driver with T5 Torx Bit to tighten the four screws as shown (0.8kgf± 0.05). Lenovo Confidential Restricted: PAGE 66 Do not share without consent from Lenovo...

  • Page 67: Earpiece Speaker Assembly

    Place the adhesive on the Rear Housing and peel off the liner. Use the Plastic Tweezer to place the Earpiece Speaker on the location, aligning with the pins as shown. Lenovo Confidential Restricted: PAGE 67 Do not share without consent from Lenovo...

  • Page 68: Secondary Mic Grommet Assembly

    Secondary Mic Grommet Assembly Description Reference # XT1955-5 TP LCM ASSY BE&712601008651 CS WT+712300341041+Sub-Mic rubber Use the Plastic Tweezer to place the Secondary Mic Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 68 Do not share without consent from Lenovo...

  • Page 69: Bb Copper Foil Assembly

    Copper Foil on the CPU Shield on the Main PCB and remove the liner as shown. Use the Plastic Tweezer to place the Conductive Cloth on the CPU Shield on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 69 Do not share without consent from Lenovo...

  • Page 70: Pmi Copper Foil Assembly

    XT1955-6 MB 3+32G DS&715201008811_VZW Use the Plastic Tweezer to place the PMI Copper Foil on the CPU Shield on the Main PCB and remove the liner as shown. Lenovo Confidential Restricted: PAGE 70 Do not share without consent from Lenovo...

  • Page 71: Headset Jack Grommet Assembly

    XT1955-5 MB 3+32G DS&715201008791_TMO XT1955-5 MB 3+32G DS&715201008801_Metro XT1955-6 MB 3+32G DS&715201008811_VZW Use the Plastic Tweezer to place and secure the Headset Jack Grommet on the Main PCB. Lenovo Confidential Restricted: PAGE 71 Do not share without consent from Lenovo...

  • Page 72: Front-Facing Camera Assembly

    Black Stick to secure the Front- Facing Camera as shown. Use the Plastic Tweezer to place and secure the Copper Foil on the Front-Facing Camera as shown. Lenovo Confidential Restricted: PAGE 72 Do not share without consent from Lenovo...

  • Page 73: Rear-Facing Camera Assembly

    Use fingers to place the Rear-Facing Camera on the location on the Main PCB. Use the flat end of the Black Stick to secure the Rear-Facing Camera as shown. Lenovo Confidential Restricted: PAGE 73 Do not share without consent from Lenovo...

  • Page 74: Main Pcb Assembly

    Use the Plastic Tweezer to place the Coax Cables on the Cable connectors on the Main PCB. Use the Torque Driver with T5 Torx Bit to tighten the screw (0.8kgf± 0.05). Lenovo Confidential Restricted: PAGE 74 Do not share without consent from Lenovo...
  • Page 75 Motorola G7 Power NA Level 2 – Service and Repair Manual Use fingers to place the Proximity Flex, Side- Key Flex, Main Flex, and Display Flex BtB Connector as shown. Lenovo Confidential Restricted: PAGE 75 Do not share without consent from Lenovo...

  • Page 76: Rear-Facing Flash Flex Assembly

    Reference # XT1955-5 Rear Housing BE&712601008661 CS WT+715000341051+flash board Silica gel Use the Plastic Tweezer to place and secure the Rear-Facing Flash Flex on the location as shown. Lenovo Confidential Restricted: PAGE 76 Do not share without consent from Lenovo...

  • Page 77: Rear-Facing Camera Lens Assembly

    WT+711900340011+NEG glass XT1955-5 Rear Housing BE&712601008661 CS MDL,CAMR,12MP,OFILM L12AA20 COB AF 30PIN Use the Plastic Tweezer to place and secure the Rear-Facing Camera Lens on the Top Carrier. Lenovo Confidential Restricted: PAGE 77 Do not share without consent from Lenovo...

  • Page 78: Top Carrier Assembly

    Use the Torque Driver with T5 Torx Bit to tighten the 10 screws (0.8kgf± 0.05). NOTE Make sure the Black and White screws are placed on their correct locations. Lenovo Confidential Restricted: PAGE 78 Do not share without consent from Lenovo...

  • Page 79: Finger Print Sensor Flex Assembly

    Use fingers to place and secure the Finger Print Sensor Flex in the pocket on the Rear Housing. Use fingers to place the plastic block on the Finger Print Sensor Flex as shown. Lenovo Confidential Restricted: PAGE 79 Do not share without consent from Lenovo...

  • Page 80: Battery Inlay Assembly

    Split the Battery from the phone. Make sure the FPS Flex is being placed in the gap on the Battery Inlay. Use fingers to press down the Battery to secure it firmly. Lenovo Confidential Restricted: PAGE 80 Do not share without consent from Lenovo...
  • Page 81 Press down the handle of the Fixture Press for 5 minutes to secure the Battery Inlay firmly on the phone. Take the phone out from the Fixture Press. Lenovo Confidential Restricted: PAGE 81 Do not share without consent from Lenovo...
  • Page 82 14. Place both thumbs on point 9 and slide them out to point 10. 15. Place both thumbs on point 11 and slide them out to point 12. Lenovo Confidential Restricted: PAGE 82 Do not share without consent from Lenovo...
  • Page 83 Motorola G7 Power NA Level 2 – Service and Repair Manual 16. Place both thumbs on point 1 and slide them around the perimeter of the Battery Inlay to point 2. Lenovo Confidential Restricted: PAGE 83 Do not share without consent from Lenovo...

  • Page 84: Imei Label Assembly

    IMEI Label Assembly Description Reference # WT+715308006441+SIM Tray BE Peel the IMEI Label from the liner and secure it on the SIM Door in the location as shown. Lenovo Confidential Restricted: PAGE 84 Do not share without consent from Lenovo...

  • Page 85: Sim Tray Assembly

    Level 2 – Service and Repair Manual Sim Tray Assembly Description Reference # XT1955-5 TP LCM ASSY BE&712601008651 CS WT+715308006441+SIM Tray BE Insert the SIM Tray in the transceiver as shown. Lenovo Confidential Restricted: PAGE 85 Do not share without consent from Lenovo...

Table of Contents