Table of Contents
Advertisement
C
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection
knob to On / Off position when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
4.12. Progress of programme
Progress of a running programme can be followed from the Programme Follow-up indicator.
At the beginning of every programme step, the relevant indicator light will turn on and light of
the completed step will turn off.
You can change the speed settings without stopping the programme flow while the
programme is running. To do this, the change you are going to make must be in a step after
the running programme step. If the change is not compatible, relevant lights will flash for 3
times.
C
If the machine does not proceed to the spinning step, the Rinse Hold function might be active
or the automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the machine.
4.13. Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the
loading door in cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode. The
machine checks the level of the water inside. If the level is suitable, the Loading Door light
turns off and the loading door can be opened within 1-2 minutes.
If the level is unsuitable, the Loading Door light remains on and the loading door cannot be
opened. If you are obliged to open the Loading Door while the Loading Door light is on, you
must cancel the current programme. See. «Cancelling the programme»
4.14. Changing the selections after programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme
is running. The light of the step which the machine is in starts flashing in the Programme
Follow-up indicator to show that the machine has been switched to the pause mode.
Additionally, when the loading door is openable, the Loading Door light turns off completely.
Changing the speed settings
You can change the speed settings of the programme that is currently running. See «Speed
selection».
C
If no change is allowed, the relevant light will flash 3 times.
Adding or taking out laundry
You can load/unload laundry when a programme is running if the water level is
appropriate to open the door. To do this:
1.Press Start / Pause button to switch the machine to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will
flash.
2.Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4.Close the Loading Door.
5. Make changes in speed settings, if necessary.
6. Press Start / Pause button to start the machine.
4.15. Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. End / Cancel light will flash
continuously to notify that the programme has been canceled.
Your machine will end the programme when you turn the Programme Selection
knob; however, it does not drain the water inside. When you select and start a new
programme, the newly selected programme will start depending on the step the
Washing Machine / User's Manual
16 / EN
Advertisement
Table of Contents
