Siemens SIMOTICS S-1FT2 Operating Instructions Manual page 47

Synchronous motors

Hide thumbs Also See for SIMOTICS S-1FT2:

Table of Contents

Lifting and transporting the motor with eyebolts

For the 1FT2☐10 motors, you can use eyebolts and a lifting beam for lifting and transporting.

Incorrect or unused lifting points

Due to incorrect or unused lifting points, the motor can fall and cause death, severe injury

and/or damage to property.

• Only lift and transport larger motors using the eyebolts screwed on to the end shields.

• Completely screw in the eyebolts and tighten by hand (approx. 8 Nm).

• Do not use bent or damaged eyebolts.

• Only use eyebolts with laminated fiber washers.

• Loads applied transversely to the plane of the eyebolts are not permitted.

① Lifting eyes

SIMOTICS S-1FT2 synchronous motors for SINAMICS S120

Operating Instructions, 07/2021, A5E50610821B AB

WARNING

4.2 Transportation and storage

1FT2

Preparing for use

Table of Contents