Appendix; Message List - Sony BRC-H800 Operating Instructions Manual
Color
Hide thumbs
Also See for BRC-H800:
- Operating instructions manual (59 pages) ,
- Firmware upgrade manual (3 pages)
Table of Contents
Advertisement
Appendix
Message List
The following messages and indications may appear on this camera. Perform the following as necessary.
Camera lamp display
Lamp
Flashing of POWER lamp (orange) and
NETWORK lamp (green)
Flashing of back Tally lamp
Camera screen display (flashing in Main menu)
Message
FAN STOP! (BASE)
PAN-TILT ERROR!
PAN-TILT FAULT!
FPGA FAULT!
CAMERA FAULT!
Meaning and solution
An error has occurred in the camera. Details of the error are displayed in the camera
menu. Deal with the error after confirming the details.
Turn off the device as it may malfunction if used in this state. Contact the inquiry
counter of your Sony Service Center or your licensed Sony dealer.
Meaning and solution
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
The movement of the camera has stopped due to an error in the pan-tilt driving unit.
Reset the pan/tilt position. Or, restart the camera.
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
53
- Quick Links:
- Using this Manual
- Camera
- System Configuration
Hide quick links:
Advertisement
Table of Contents
