Page 2
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
Table of Contents 1. Safety and environment instructions 3 4 Preparation 1.1. General safety..... . . 3 4.1. What to do for energy saving ... 17 1.1.1 HC warning .
Safety and environment instructions This section provides the safety – staff kitchen areas in shops, instructions necessary to prevent offices and other working the risk of injury and material environments; damage. Failure to observe these – farm houses and by clients in instructions will invalidate all hotels, motels and other residential types of product warranty.
Page 5
Safety and environment instructions Unplug the product during Plug the product into an • • installation, maintenance, earthed socket. Earthing cleaning and repair. must be done by a qualified If the product will not be used electrician. • for a while, unplug the product If the product has LED type •...
Safety and environment instructions Take care to avoid trapping any 1.1.2 For models with • part of your hands or body in water dispenser any of the moving parts inside Pressure for cold water inlet • the product. shall be maximum 90 psi (6.2 Do not step or lean on the door, bar).
Safety and environment instructions Do not keep sensitive 1.5. Compliance with RoHS Directive • • This product complies with EU WEEE Directive products requiring controlled (2011/65/EU). It does not contain harmful and temperatures (vaccines, prohibited materials specified in the Directive. heat sensitive medication, 1.6.
Page 9
Refrigerator *Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models. Refrigerator / User Guide 8 / 43 EN...
Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Use the plastic wedges in the provided with Contact the Authorized Service for the product's the product to provide sufficient space for air installation. To ready the product for installation, circulation between the product and the wall.
Installation 3.3. Adjusting the stands If the product is not in balanced position, adjust the front adjustable stands by rotating right or left. adjusting nut fixing nut fixing nut adjusting nut 3.4. Power connection WARNING: Do not use extension or multi sockets in power connection.
Installation 3.5. Water connection (Optional) WARNING: Unplug the product and the water pump (if available) during connection. The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model.
Installation 3.6. Connecting water 3.7. Connecting to water mains hose to the product (Optional) To connect the water hose to the product, To use the product by connecting to the cold water follow the instructions below. mains, a standard 1/2” valve connector must be 1.
Installation 4. Attach the connector into the faucet adaptor 2. Connect the other end of the water hose to and tighten by hand / tool. the water pump by pushing the hose into the pump’s hose inlet. 5. To avoid damaging, shifting or accidentally 3.
Installation 3.9.1.Fixing external filter on the wall (Optional) WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 4. Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.) 1.
Installation 3.9.2.Internal filter 1. “Ice Off” indicator must be active while installing the filter. Switch the ON-OFF The internal filter provided with the product is not indicator using the “Ice” button on the screen. installed upon delivery; please follow the instructions below to install the filter.
Page 17
Installation 3. Remove the water filter by-pass cover by pulling. A few drops of water may flow out after removing the cover; this is normal. 4. Place the water filter cover into the mechanism and push to lock in place. 5.
Preparation • Make sure the foods are not in contact with 4.1. What to do for energy saving the cooler compartment temperature sensor mehmet described below. Connecting the product to electronic energy-saving systems is harmful, as it may damage the product. • Do not keep the refrigerator doors open for long periods.
Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator. 1. Cooler compartment indicator 2. Error status indicator 3. Temperature indicator 4.
Page 20
Using the product 1. Cooler compartment indicator Push the Vacation button ( ) again to cancel The cooler compartment light will turn on when this function. adjusting the cooler compartment temperature. 5. Temperature adjustment button 2. Error status indicator Respective compartment's temperature varies in This sensor will activate if the refrigerator is not -24°C..
Page 21
Using the product Eco Mode interaction with product/ Display On after any interaction with buttons Yellow: Vacation *Optional: The figures in this user guide are intended as drafts and may not perfectly match your product. If your product does not comprise the relevant parts, the information pertains to other models. Refrigerator / User Guide 20 / 43 EN...
Page 22
Using the product 1- Power failure/High temperature / error 2. Freezer compartment temperature setting warning Temperature setting is made for freezer 2- Freezer compartment temperature setting compartment. When this button is pressed, 3- Quick freeze you can set the temperature of the freezer 4- Key lock compartment to -18, -19, -20, -21, -22, -23 and 5- Vacation function...
Page 23
Using the product 6.Quick fridge Quick fridge indicator is lit ( ) and the fridge compartment temperature indicator value is displayed as 1 when the quick fridge function is activated. To cancel this function, press the Quick fridge button again. Quick fridge indicator will be off and the refrigerator will be reset to its normal settings.
Page 24
Using the product 7.1 7.2 1. Economic use 2- High temperature / fault alert 3. Energy saving function (display off) 4- Rapid cooling 5- Vacation function 6- Cooler compartment temperature setting 7. Energy saving (display off) /Alarm off 8- Keypad lock 9- Eco-fuzzy 10- Freezer compartment temperature setting 11- Rapid freezing...
Page 25
Using the product 1. Economic use compartment. This sign will light up when the freezer 5. Vacation function compartment is set to -18°C', the most To activate the Vacation function, , press the quick economical setting. ( ) Economic use indicator fridge button for 3 seconds;...
Page 26
Using the product refrigerator’s tempeture settings. 9. Eco-fuzzy To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up.
Page 27
Using the product 11.2 11.1 1. Freezer compartment temperature setting 2. Economy mode 3. Energy saving function (display off) 4. Power failure/High temperature / error warning indicator 5. Cooler compartment temperature setting 6. Rapid cooling 7. Vacation function 8. Keypad lock / filter replacing alert cancellation 9.
Page 28
Using the product Press this button again to deactivate this function. 1. Freezer compartment temperature setting Use this function when placing fresh foods into Pressing the button ( ) will enable the freezer the cooler compartment or to rapidly cool the compartment temperature to be set at -18,-19,- food items.
Page 29
Using the product 11.2 Alarm off warning 5.2. Moisture controlled In case of power failure/high temperature alarm, vegetable bin after checking the food located in the freezer (Optional) compartment press the alarm off button to clear With moisture control feature, moisture rates of the warning.
Using the product 5.3. Activating water filter change warning (For products connected to the mains water line and equipped with filter) Water filter change warning is activated as follows: Automatic filter usage time calculation is not enabled ex factory. It must be enabled in products equipped with a filter. The S4 display board we use in the refrigerator has a nine-key system.
Page 31
Using the product Press twice Press once “Upon seeing PS 0 screen, de-energise the refrigerator and energise it again. This way, the filter counter will be activated. The filter warning LED will be active on the display in 130 days. After replacing the filter with a new one, press the Key Lock button for 3 seconds to make the filter counter to count down from 130 days.
Using the product 5.4. Using the water fountain 5.5. Filling the fountain water tank Open the water tank’s lid, as shown in the figure. (for certain models) Fill in pure and clean drinking water. Close the lid. The first few glasses of water taken from the fountain will normally be warm.
Using the product 5.6. Cleaning the water tank Remove the water filling reservoir inside the door shelf. Detach by holding both sides of the door shelf. Hold both sides of the water tank and remove at 45° angle. Remove and clean the water tank lid. Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in...
Using the product 5.7. Taking ice / water • The water may be cloudy during first use of the filter; do not consume the first 10 glasses (Optional) of water. To take water ( ) / ice cube ( ) / fragmented • You must wait approximately 12 hours to get ice ( ), use the display to select the respective...
Using the product 5.9. Zero degree compartment 5.12. Ionizer (Optional) (Optional) Use this compartment to keep delicatessen The ionizer system in the cooler compartment's at lower temperatures or meat products for air duct serves to ionize the air. The negative immediate consumption.
Using the product 5.16. Ice-maker 5.15. Icematic and ice storage box (Optional) (Optional) Ice maker is located on the upper section of the Fill the icematic with water and put in place. freezer cover. The ice will be ready after approximately two hours.
Page 37
Using the product Push downwards firmly, until there is no space left When ice does not come out, check for any ice stuck between the reservoir and the door plastic. (Figure 2) in the canal and remove it. Regularly check the ice If you have difficulty in refitting the reservoir, turn the canal to clear the obstacles as shown in the figure 5.
Page 38
Using the product Then it will be suitable for taking broken ice again. While taking broken Ice, cubed ice may come first. There is a case of coming cubed ice while taking broken ice. Freezer door on front of the ice machine can create a light snow and film layer.
Using the product 5.17. Freezing fresh food 5.18. Recommendations for storing frozen foods • To preserve food quality, the food items placed in the freezer compartment must be frozen as The compartment must be set to at least -18°C. quickly as possible, use the rapid freezing for 1.
Using the product 5.20. Placing the food Freezer Various frozen goods including compartment meat, fish, ice cream, shelves vegetables etc. Cooler Food items inside pots, capped compartment plate and capped cases, eggs shelves (in capped case) Cooler Small and packed food or compartment beverages door shelves...
Maintenance and cleaning • Never use cleaning agents or water Cleaning your fridge at regular intervals will that contain chlorine to clean the extend the service life of the product. outer surfaces and chromium coated WARNING: Unplug the product before parts of the product.
Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working.
Page 43
Troubleshooting • The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again. The cooler temperature is very low, but the freezer temperature is adequate. • The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
Page 44
Troubleshooting • The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water. • Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour. • The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-organisms may spread out of unsealed food items and cause malodour.