Prevention Of Electro Static Discharge - Yamaha DVX-S200 Service Manual
Home theater sound system
Hide thumbs
Also See for DVX-S200:
- Owner's manual (115 pages) ,
- Product catalog (44 pages) ,
- Supplementary manual (40 pages)
Table of Contents
Advertisement
DVR-S200/NX-P200
WARNING
The use of optical instruments with this product will increase eye hazard.
Repair handling should take place as much as possible with a disc loaded inside the player.
U, C, R, K, A, G, B, L models
PREVENTION OF ELECTRO STATIC DISCHARGE
The laser diode in the traverse unit (optical pickup) may be damaged due to static electricity from clothes or the human
body. Use caution to prevent electrostatic damage when servicing or handling the laser diode.
1. Grounding for electrostatic damage prevention
Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the
working environment. Only attempt service after ensuring that all grounding procedures have been completed.
1. Worktable grounding
Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed.
2. Human body grounding
Use an anti-static wrist strap to discharge the static electricity from your body.
Anti-static wrist strap
2. Handling of the optical pickup
1. To prevent damage to the optical pickup replacement parts during transportation and before installation, both ends
of the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correct
procedure in this service manual.
2. Do not use a tester to check the laser diode in the optical pickup. The power supply in the tester will damage the
laser diode.
3. Handling Precautions for the Traverse Unit (Optical Pickup)
1. Handle the traverse unit (optical pickup) gently, as it is an extremely high-precision assembly.
2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable.
3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor.
4
1MΩ
U, C, R, K, A, G, B, L models
The label is put on the bottom
side of the unit.
Conductive material
(sheet) or steel sheet
Advertisement
Table of Contents
