hit counter script
Download
Share
Print this page
ABB REC670 Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Power protection unit
  5. Relion REC670
  6. Product manual

ABB REC670 Product Manual

Relion 670 series, pre-configured
Hide thumbs Also See for REC670:

Advertisement

Quick Links

Download this manual
®
Relion
670 series
Bay control REC670
Pre-configured
Product Guide

Advertisement

loading

Related Manuals for ABB REC670

Summary of Contents for ABB REC670

  • Page 1 ® Relion 670 series Bay control REC670 Pre-configured Product Guide...

  • Page 2: Table Of Contents

    5. Hardware description.........19 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB. ABB AB assumes no responsibility for any errors that may appear in this document.

  • Page 3: Application

    1. Application single failure in the protection system. 6 x 32 dual directional channels for intertrip REC670 is used for the control, protection and binary signals transfer is available on and monitoring of different types of bays in each included communication card in the power networks.

  • Page 4: Available Functions

    Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 2. Available functions ANSI Function description Single Breaker Double brekaer 1 1/2 breaker for (A30) (B30) individual CB (C30) Basic Option Basic Option Basic Option (Qty/...
  • Page 5 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 ANSI Function description Single Breaker Double brekaer 1 1/2 breaker for (A30) (B30) individual CB (C30) Basic Option Basic Option Basic Option (Qty/ (Qty/ (Qty/ Option...

  • Page 6: Functionality

    Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 ANSI Function description Single Breaker Double brekaer 1 1/2 breaker for (A30) (B30) individual CB (C30) Basic Option Basic Option Basic Option (Qty/ (Qty/ (Qty/ Option...
  • Page 7 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 EF4PTOC can be set directional or non- protection can allow the protected circuit to directional independently for each of the steps. operate closer to the thermal limits.
  • Page 8 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 CCRBRF can be single- or three-phase Each function has two steps with definite initiated to allow use with single phase time delay. Reset times for every step can be tripping applications.
  • Page 9 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Two step residual overvoltage protection SAPTOF is provided with an undervoltage ROV2PTOV calculates the residual voltage blocking. The operation is based on single- from the three-phase voltage input...
  • Page 10 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 CT circuit will mean that the situation will The systems can thus be reconnected after an remain and extremely high voltages will autoreclose or manual closing, which stress the secondary circuit.
  • Page 11 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 bay. Permission to operate is given after IED and is not dependent on any central evaluation of conditions from other functions function. For the station-wide interlocking,...
  • Page 12 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 though the LV CB is open, compensation for such as binary inputs and SPGGIO function a possible capacitor bank on the LV side bay blocks. of a transformer, extensive tap changer...
  • Page 13 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 This unwanted tripping affects the healthy Scheme communication logic for residual line when a fault is cleared on the other line. overcurrent protection ECPSCH This lack of security can result in a total loss To achieve fast fault clearance of earth faults of interconnection between the two buses.
  • Page 14 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 • OR function block. Extension logic package • INVERTER function blocks that inverts the The logic extension block package includes input signal. additional trip matrix logic and configurable logic blocks.
  • Page 15 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Alarm limits can be set and used as triggers, may be uploaded to PCM600 and further e.g. to generate trip or alarm signals. analysis using the disturbance handling tool.
  • Page 16 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 The event recording information is an Event function integrated part of the disturbance record (Comtrade file). When using a Substation Automation system with LON or SPA communication, time-...
  • Page 17 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 measured values can be supervised with four • Status indication LEDs. settable limits that is low-low limit, low limit, • Alarm indication LEDs, which consist of high limit and high-high limit.
  • Page 18 (over LON only). Serial communication, LON Remote communication Existing stations with ABB station bus LON can be extended with use of the optical LON Analog and binary signal transfer to interface. This allows full SA functionality...

  • Page 19: Hardware Description

    Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 situated at distances <110 km or from the Binary output module BOM IED to optical to electrical converter with G. 703 or G.703E1 interface located on a The binary output module has 24 distances <3 km away.
  • Page 20 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Line data communication module LDCM Transformer input module TRM Each module has one optical port, one for The transformer input module is used to each remote end to which the IED galvanically separate and transform the communicates.
  • Page 21 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 xx05000004.vsd IEC05000004 V1 EN Figure 3. Side-by-side mounting Case size 6U, 1/2 x 19” 265.9 223.7 201.1 242.1 252.9 205.7 6U, 3/4 x 19” 265.9 336.0 201.1 242.1...

  • Page 22: Connection Diagrams

    Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 6. Connection diagrams Table 1. Designations for 1/2 x 19” casing with 1 TRM slot Module Rear Positions BIM, BOM, SOM or IOM X31 and X32 etc. to X51...
  • Page 23 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 2. Designations for 3/4 x 19” casing with 1 TRM slot Module Rear Positions BIM, BOM, SOM, IOM or X31 and X32 etc. to X101 and X102...
  • Page 24 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 3. Designations for 3/4 x 19” casing with 2 TRM slot Module Rear Positions BIM, BOM, SOM, IOM or X31 and X32 etc. to X71 and...
  • Page 25 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 4. Designations for 1/1 x 19” casing with 1 TRM slot Module Rear Positions BIM, BOM, SOM, X31 and X32 etc. to X161 IOM or MIM...
  • Page 26 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 5. Designations for 1/1 x 19” casing with 2 TRM slots Module Rear Positions BIM, BOM, SOM, X31 and X32 etc. to X131 IOM or MIM...
  • Page 27 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000479 BG V1 EN Figure 4. Transformer input module (TRM) ￭ Indicates high polarity CT/VT-input designation according to figure AI01 AI02 AI03 AI04 AI05 AI06 AI07...
  • Page 28 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000484 BG V1 EN Figure 6. mA input module (MIM) IEC08000480 BG V1 EN Figure 5. Binary input module (BIM). Input contacts named XA corresponds to...
  • Page 29 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000477 BG V1 EN Figure 7. Communication interfaces (OEM, LDCM, SLM and HMI) Note to figure Rear communication port SPA/IEC 61850-5-103, ST-connector for glass alt. HFBR Snap-in connector for plastic as ordered Rear communication port LON, ST connector for glass alt.
  • Page 30 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000478 BG V1 EN Figure 9. GPS time synchronization module (GSM) IEC08000481 BG V1 EN Figure 10. Binary output module (BOM). Output contacts named XA corresponds to rear position X31, X41, and so on, and output contacts named XB to rear position X32, X42, and so on.
  • Page 31 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000482 BG V1 EN Figure 11. Static output module (SOM) IEC08000483 BG V1 EN Figure 12. Binary in/out module (IOM). Input contacts named XA corresponds to rear position X31, X41, and so on, and output contacts named XB to rear position X32, X42, and so on.
  • Page 32 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS WA1 BUS WA2 QB1-OPEN QB1-CLOSE QB2-OPEN QB2-CLOSE -QB1 OPEN QB1 -QB2 CLOSE QB1 OPEN QB2 CLOSE QB2 TRM1:10 MCB-OK TRM1:11 MCB-OK -QA1 CLOSE QA1 CLOSE Reinf...
  • Page 33 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS WA1 QB1-OPEN -QB1 QB1-CLOSE OPEN QB1 CLOSE QB1 -QA1 TRM1:11 MCB-OK CLOSE QA1 CLOSE Reinf MAIN 2 TRIP TRIP QA1 L1,L2,L3 TRIP Reinf QA1-OPEN QA1-CLOSE...
  • Page 34 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Figure 14. Typical connection diagram for a feeder connected to a double breaker arrangement =1-BU1 QB1 OPEN -QB1 QB1 CLOSE OPEN QB1 CLOSE QB1 =1-QA1 TRM1:10...

  • Page 35: Technical Data

    Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 7. Technical data General Definitions Reference The specified value of an influencing factor to which are referred the value characteristics of the equipment Nominal The range of values of an influencing quantity (factor) within which, under...
  • Page 36 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 7. MIM - mA input module Quantity: Rated value: Nominal range: Input resistance = 194 Ohm Input range ± 5, ± 10, ± 20mA 0-5, 0-10, 0-20, 4-20mA Power consumption £...
  • Page 37 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Binary inputs and outputs Table 10. BIM - Binary input module Quantity Rated value Nominal range Binary inputs RL ± 20% DC voltage, RL 24/40 V 48/60 V RL ±...
  • Page 38 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 12. IOM - Binary input/output module Quantity Rated value Nominal range Binary inputs RL ± 20% DC voltage, RL 24/40 V 48/60 V RL ± 20% 110/125 V RL ±...
  • Page 39 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 14. SOM - Static Output Module (reference standard: IEC 61810-2): Static binary outputs Function of quantity Static binary output trip Rated voltage 48 - 60 VDC...
  • Page 40 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 15. SOM - Static Output module data (reference standard: IEC 61810-2): Electromechanical relay outputs Function of quantity Trip and signal relays Max system voltage 250V AC/DC...
  • Page 41 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Influencing factors Table 17. Temperature and humidity influence Parameter Reference value Nominal range Influence Ambient +20 °C -10 °C to +55 °C 0.02% /°C temperature, operate...
  • Page 42 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Type tests according to standards Table 20. Electromagnetic compatibility Test Type test values Reference standards 1 MHz burst disturbance 2.5 kV IEC 60255-22-1, Class III Ring wave immunity test...
  • Page 43 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 21. Insulation Test Type test values Reference standard Dielectric test 2.0 kV AC, 1 min. IEC 60255-5 5 kV, 1.2/50 ms, 0.5 J Impulse voltage test Insulation resistance >100 MW at 500 VDC...
  • Page 44 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Differential protection Table 25. High impedance differential protection (PDIF, 87) Function Range or value Accuracy Operate voltage (20-400) V ± 1.0% of U for U < U ±...
  • Page 45 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 27. Four step phase overcurrent protection OC4PTOC Function Setting range Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ± 1.0% of I at I > I Reset ratio >...
  • Page 46 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 28. Instantaneous residual overcurrent protection EFPIOC Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ± 1.0% of I at I > I Reset ratio >...
  • Page 47 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 29. Four step residual overcurrent protection EF4PTOC Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ±...
  • Page 48 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 30. Sensitive directional residual overcurrent and power protection SDEPSDE Function Range or value Accuracy ± 1.0% of I at I £ I (0.25-200.00)% of lBase Operate level for 3I ·cosj...
  • Page 49 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 30. Sensitive directional residual overcurrent and power protection SDEPSDE , continued Function Range or value Accuracy Operate time, non 60 ms typically at 0 to 2 x I...
  • Page 50 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 32. Thermal overload protection, two time constants TRPTTR Function Range or value Accuracy Base current 1 and 2 (30–250)% of IBase ± 1.0% of I...
  • Page 51 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 34. Pole discordance protection CCRPLD Function Range or value Accuracy Operate current (0–100)% of IBase ± 1.0% of I Time delay (0.000-60.000) s ± 0.5% ± 10 ms Table 35.
  • Page 52 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Voltage protection Table 38. Two step undervoltage protection UV2PTUV Function Range or value Accuracy Operate voltage, low and (1–100)% of UBase ± 1.0% of U high step Absolute hysteresis (0–100)% of UBase...
  • Page 53 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 40. Two step residual overvoltage protection ROV2PTOV Function Range or value Accuracy Operate voltage, low and (1-200)% of Ubase ± 1.0% of U at U < U high step ±...
  • Page 54 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Frequency protection Table 42. Underfrequency protection SAPTUF Function Range or value Accuracy Operate value, start function (35.00-75.00) Hz ± 2.0 mHz Operate time, start function 100 ms typically...
  • Page 55 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Multipurpose protection Table 45. General current and voltage protection (GAPC) Function Range or value Accuracy Measuring current input phase1, phase2, phase3, PosSeq, NegSeq, 3*ZeroSeq, MaxPh, MinPh, UnbalancePh,...
  • Page 56 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 45. General current and voltage protection (GAPC), continued Function Range or value Accuracy Voltage level where voltage (0.0 - 5.0)% of U ± 1.0% of U...
  • Page 57 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 45. General current and voltage protection (GAPC), continued Function Range or value Accuracy Undervoltage: Critical impulse time 10 ms typically at 2 to 0 x U...
  • Page 58 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Control Table 48. Synchronizing, synchrocheck and energizing check SESRSYN Function Range or value Accuracy Phase shift, j (-180 to 180) degrees line (0.40-25.000) % of UBase...
  • Page 59 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 49. Autorecloser SMBRREC Function Range or value Accuracy Number of autoreclosing shots 1 - 5 Number of autoreclosing programs Autoreclosing open time: shot 1 - t1 1Ph (0.000-60.000) s...
  • Page 60 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 50. Voltage control TR1ATCC, TR8ATCC, TCMYLTC and TLCYLTC Function Range or value Accuracy Transformer reactance (0.1–200.0)Ω, primary Time delay for lower command (1.0–100.0) s when fast step down mode is...
  • Page 61 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 50. Voltage control TR1ATCC, TR8ATCC, TCMYLTC and TLCYLTC, continued Function Range or value Accuracy Alarm level of active power in (-9999.99–9999.99) MW ± 1.0% of S...
  • Page 62 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 52. Current reversal and weak-end infeed logic for distance protection ZCRWPSCH Function Range or value Accuracy Detection level phase-to- (10-90)% of UBase ± 1.0% of U...
  • Page 63 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Logic Table 55. Tripping logic SMPPTRC Function Range or value Accuracy Trip action 3-ph, 1/3-ph, 1/2/3-ph Minimum trip pulse length (0.000-60.000) s ± 0.5% ± 10 ms Timers (0.000-60.000) s...
  • Page 64 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Monitoring Table 58. Measurements CVMMXN Function Range or value Accuracy ± 2.0 mHz Frequency (0.95-1.05) × f ± 0.5% of U Voltage (0.1-1.5) ×U at U£U ±...
  • Page 65 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 61. Disturbance report DRPRDRE Function Range or value Accuracy Pre-fault time (0.05–1.00) s Post-fault time (0.1–10.0) s Limit time (0.5–10.0) s Maximum number of recordings...
  • Page 66 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 63. Event list Function Value Buffer capacity Maximum number of events in 1000 the list Resolution 1 ms Accuracy Depending on time synchronizing Table 64. Indications...
  • Page 67 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 67. Disturbance recorder Function Value Buffer capacity Maximum number of analog inputs Maximum number of binary inputs Maximum number of disturbance reports 100 Maximum total recording time (3.4 s recording time and...
  • Page 68 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 72. SPA communication protocol Function Value Protocol Communication speed 300, 1200, 2400, 4800, 9600, 19200 or 38400 Bd Slave number 1 to 899 Table 73. IEC 60870-5-103 communication protocol...
  • Page 69 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Remote communication Table 77. Line data communication module Characteristic Range or value Type of LDCM Short range Medium range Long range (LR) (SR) (MR) Type of fibre...
  • Page 70 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 78. Case Material Steel sheet Front plate Steel sheet profile with cut-out for HMI Surface treatment Aluzink preplated steel Finish Light grey (RAL 7035) Table 79. Water and dust protection level according to IEC 60529...
  • Page 71 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Basic IED functions Table 83. Self supervision with internal event list Data Value Recording manner Continuous, event controlled List size 1000 events, first in-first out Table 84. Time synchronization, time tagging...
  • Page 72 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 87. IRIG-B Quantity Rated value Number of channels IRIG-B Number of channels PPS Electrical connector IRIG-B Optical connector PPS and IRIG-B Type ST Type of fibre 62.5/125 μm multimode fibre...
  • Page 73 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 89. IEC Inverse time characteristics Function Range or value Accuracy Operating characteristic: k = (0.05-999) in steps of 0.01 æ ö ç ÷ × ç...
  • Page 74 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 90. RI and RD type inverse time characteristics Function Range or value Accuracy RI type inverse characteristic k = (0.05-999) in steps of 0.01 IEC 60255-3, class 5 + 40 ms ×...
  • Page 75 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 91. Inverse time characteristics for Two step undervoltage protection (PUVM, 27) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of Class 5 +40 ms 0.01...
  • Page 76 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 92. Inverse time characteristics for Two step overvoltage protection (POVM, 59) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of Class 5 +40 ms 0.01...
  • Page 77 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 93. Inverse time characteristics for Two step residual overvoltage protection (POVM, 59N) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in Class 5 +40 ms steps of 0.01...

  • Page 78: Ordering

    Exemple code: REC670*1.1-A30-C01D02F01H04-X0-D-C-B-B-A6X0-DAXR-X-XD. Using the code of each position #1-12 specified as REC670*1-2 2-3 3 3 3 3 3 3 3-4 4-5-6-7 7-8-9 9 9-10 10 10 10 10 10 10 10 10 10 10 10 10 10-11 11 11 11 11 11-12 12...
  • Page 79 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Software options Notes and Rules No option All fields in the ordering form do not need to be filled in High impedance differential Note: A02 only in A30/B30, A07...
  • Page 80 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Casing Notes and Rules 1/2 x 19" case 3/4 x 19" case 1 TRM slot 3/4 x 19" case 2 TRM slots 1/1 x 19" case 1TRM slots 1/1 x 19"...
  • Page 81 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Binary input/output module, Notes and Rules mA and time synchronizating boards. Note: 1BIM and 1 BOM included. Slot position (rear view) Note: Max 3 positions in 1/2...
  • Page 82 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Remote end communication, DNP serial comm. Notes and Rules and time synchronization modules Slot position (rear view) Available slots in 1/2 case with 1TRM Note: Max 1 LDCM in 1/2 case Available slots in 3/4 &...
  • Page 83 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Basic IED functions Self-supervision with internal event list Time and synchronization error Time synchronization Parameter setting groups Test mode functionality Change lock function IED Identifiers Product information...
  • Page 84 IED 670 products is described in Multi-breaker/Single or Three Phase trip with 1MRK 512 001-BEN and 1MRK 001024-CA. internal neutral on current circuits (ordering Please refer to the website: www.abb.com/ number RK926 315-BE). substationautomation and ABB Product Multi-breaker/Single or Three Phase trip with Guide >...
  • Page 85 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 External resistor unit for high impedance differential protection High impedance resistor unit 1-ph with resistor 1.8 kOhms and Quantity: RK795101-MA voltage dependent resistor for 20-100V operating voltage High impedance resistor unit 3-ph with resistor 1.8 kOhms and...
  • Page 86 Bay control REC670 1MRK 511 192-BEN B Pre-configured Product version: 1.1 Issued: June 2010 User documentation Rule: Specify the number of printed manuals requested Quantity: 1MRK 511 188-UEN Operator’s manual ANSI Quantity: 1MRK 511 188-UUS Technical reference manual Quantity: 1MRK 511 187-UEN...
  • Page 87 IEC 61850 Data objects list for IED 670, ver. 1.1 1MRK 500 084-WEN Engineering guide IED 670 products 1MRK 511 179-UEN Communication set-up for RED 670 Differential protection and 670 series 1MRK 505 197-UEN More information can be found on www.abb.com/substationautomation.
  • Page 89 Contact us ABB AB Substation Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 +46 (0) 21 14 69 18 www.abb.com/substationautomation...