Starting A Warm Engine; Shifting - Yamaha TT-R50E Owner's Manual
Hide thumbs
Also See for TT-R50E:
- Owner's service manual (391 pages) ,
- Owner's manual (90 pages) ,
- Owner's manual (86 pages)
Table of Contents
Advertisement
Starting a warm engine
Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not re-
quired when the engine is warm.
OPERATION AND IMPORTANT RIDING POINTS
EAU16641
Shifting
1. Shift pedal
2. Neutral position
This motorcycle has a 3-speed trans-
mission with a centrifugal, automatic
clutch. Shifting gears lets you control
the amount of engine power available
for starting off, accelerating, climbing
hills, etc.
The gear positions are shown in the il-
lustration.
TIP
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel.
EAU39902
NOTICE
Even with the transmission in
Always release the throttle grip
To start out and accelerate
1. Close the throttle.
2. Shift into first gear and release the
6-2
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
the transmission.
before changing gears to avoid
damaging the engine, transmis-
sion, and drive train, which are
not designed to withstand the
shock of shifting when the
throttle grip is open.
shift pedal. NOTICE: Always
close the throttle before shifting
gears, otherwise damage to the
engine and drive train may re-
sult.
[ECA15462]
ECA15442
6
EAU39912
Advertisement
Table of Contents
Troubleshooting
