Related Manuals for Brother BAS H Series
Summary of Contents for Brother BAS H Series
- Page 1 BAS H series INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. LCD PANEL / OPERATION PANEL...
-
Page 2: Table Of Contents
2-7. Maintenance mode ····································································································· 34 3. USING STORAGE MEDIA ························································36 3-1. Notes on handling ········································································································ 36 3-2. Folder structure ············································································································ 36 3-3. Importing and exporting data ······················································································· 37 3-4. Importing items of sewing data separately ·································································· 39 BAS H series... -
Page 3: Using The Lcd Panel (Basic Operations)
Touch to switch to the sewing operation screen. (2) Programming key Touch to switch to the programming screen. (3) File Manager key Touch to switch to the file manager screen. (4) Settings key Touch to switch to the setting menu screen. BAS H series... -
Page 4: Sewing Operation Screen
Touch to switch to the cycle program editing screen. Touch to switch to the sewing program copying screen. (5) Copy key (6) Type key Touch to select the program type. (7) Program No. keys Touch to display/select the current program number. (Continued on next page) BAS H series... - Page 5 Shows the current date and time. (29) Comments Shows comments about the sewing data. Touch to switch to digital tension editing mode. (30) Tension editing check key This is not displayed when digital tension is not being used. BAS H series...
-
Page 6: Parameter Setting Method
For -5 and -7 specifications, 160 Thread wiping Touch the Wiper key (3) to turn the wiper on or off. (The initial value varies for each model and specification.) When the setting is on, the key is displayed in blue. BAS H series... -
Page 7: X/Y-Scale, X/Y-Offset
(If using a two-pedal foot switch, lower the work clamp before depressing the start switch. For the hand start switch, use the right switch to lower the feed plate lock cylinder and work clamp, and then press the left and right switches at the same time.) BAS H series... - Page 8 Touch to confirm the setting and return the display to the previous screen. (10) Default key Touch to return the setting to the initial value. (11) Cancel key Touch to return to the previous screen without changing the setting. BAS H series...
-
Page 9: Slow Start Pattern
Sewing speed for 2nd stitch 1000 1200 Sewing speed for 3rd stitch 1000 1200 1600 Sewing speed for 4th stitch 1200 1400 *1 Sewing will be carried out at the sewing speed which is set by the “Sewing speed” parameter. BAS H series... -
Page 10: Using The Lower Thread Counter
When the lower thread setting value has been set, the same value will appear as the lower thread counter value (2). ・ I f the value is set to "0000", the lower thread counter will not operate. The lower thread setting value can be set to "0"-"9999". BAS H series... - Page 11 When this happens, the sewing machine cannot be operated. Touch the Reset key (6) to return the lower thread counter value to the initial value, and then sewing will be possible again. [Message screen] BAS H series...
-
Page 12: Using The Production Counter
Touch the Cancel key (4) to return to the sewing operation screen without changing the value. <Production counter operation> The production counter always operates, and it increases by 1 each time sewing of an item is completed. BAS H series... -
Page 13: Split Number Setting Method
* The feed mechanism will move to the home position and the program number will be confirmed. (The “Program No.” setting (2) will stop flashing and illuminate steadily.) Use the "Split No." △ or ▽ key (3) to select the split number. BAS H series... - Page 14 Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two split codes). [Independent split] Memory switch No. 403 = 1 ・ The pattern for the displayed split number is sewn independently. BAS H series...
-
Page 15: Copying Programs
Touch the Cancel key to return to the previous screen without copying. * The number which is selected as the copy destination program number will flash only if sewing data already exists in a program assigned to that number. BAS H series... -
Page 16: Checking The Sewing Pattern
・ Touch the Move to sewing start key (5) to return to the sewing start. 4441Q 4923Q 4169B BAS H series... - Page 17 ・ If you would like to stop the feeding operation, touch the continuous feed stop key (3). ・ Touch the Move to sewing start key (5) to return to the sewing start. BAS H series...
-
Page 18: Setting The Work Clamp Lift Amount
The settings for the work clamp and intermittent presser foot lift amounts can be changed at the sewing operation screen. * For pneumatic work clamp specifications, only intermittent presser foot height setting mode will be available. [Sewing operation screen] Touch the Clamp key (1) to display the Adjust Clamp Height setting screen. BAS H series... -
Page 19: For Bas-311H/Bas-326H/Bas-326H-484/Bas-341H/Bas-342H
- Touch the Reset key (5) to return the value which currently appears in the display to the value which was first displayed when you switched to the setting screen. The sewing machine's intermittent presser foot will operate according to this value. BAS H series... - Page 20 * After the presser foot has been replaced, it will be necessary to make corrections to the When lowered intermittent stroke drop position. Ask the place of purchase for information on the correction method. When sewing 5033Q BAS H series...
-
Page 21: For Bas-360H/Bas-365H
Touch the △ or ▽ key to change the stroke amount. Stroke (6) If you change the value, the sewing machine's intermittent presser foot will move. Setting range: 0.0 to 10.0 mm, 0.1mm units, initial value: 3.0 mm BAS H series... - Page 22 * After the presser foot has been replaced, it will be necessary to make corrections to the When lowered intermittent stroke drop position. Ask the place of purchase for information on the correction method. When sewing 4170B BAS H series...
-
Page 23: Using The Lcd Panel (Advanced Operations)
To prevent problems, do not use objects with sharp points to operate the LCD panel. 2-1. Memory switch setting method Press the HOME key to switch to the home screen. [Home screen] Touch the Settings key (1) to switch to the setting menu screen. [Setting menu screen] Select “Memory Switch”. BAS H series... - Page 24 ・ Cancel key (8): This returns the display to the memory switch selection screen without confirming the value. ・ OK key (9): This confirms the value and then returns the display to the memory switch selection screen. BAS H series...
-
Page 25: List Of Memory Switch Settings
Parameters can be set separately for each program. Split mode selection Continuous split mode Single split mode (*1) The position of the work clamp stopper must be set. (*2) This is not displayed for the BAS-360H/365H. (Continued on next page) BAS H series... - Page 26 The cycle program number is assigned. Assignment to direct selection key 4 No program number is assigned to direct selection key 4. 1 - 999 The program number is assigned. C01 - C30 The cycle program number is assigned. BAS H series...
-
Page 27: Using Cycle Programs
* To edit a cycle program which has already been created, first select the desired cycle program number and then touch the cycle program key. [Sewing operation screen] Touch the add step key (1) in the cycle program editing screen to switch to the add step screen. [Cycle program editing screen] BAS H series... - Page 28 Select "Program No." in the add step screen and then touch the OK key to add that program number. The display will then return to the cycle program editing screen. * If you touch the multiple select key (8), you can select multiple files. [Add step screen] (5) (6) [Cycle program editing screen] BAS H series...
- Page 29 Numbers from C01 to C30 can be saved. [Cycle program save screen] Touch the OK key (7) in the cycle program editing screen to return to the sewing operation screen. BAS H series...
- Page 30 The currently selected section number is displayed. (12) Section No. keys Touch the ▽△ keys to select the section number. The tension value of the currently selected section number is displayed. (13) Tension keys Touch the ▽△ keys to select the tension value. BAS H series...
-
Page 31: Direct Selection
・ If a program number (sewing pattern) which has been registered in a direct selection key cannot be loaded, the display will be inactive and the key cannot be selected. ・ If you keep pressing a direct selection key, the display will switch to the settings for the program number displayed with this key. BAS H series... -
Page 32: Setting The Sewing Screen Display
This lets you set whether the codes which are displayed in the sewing screen preview are displayed or not displayed. 1. Press the HOME key to switch to the home screen. Touch the Settings key (1) to switch to the setting menu screen. [Home screen] Select "Sewing Screen". [Setting menu screen] BAS H series... - Page 33 If you would like the codes to be displayed, select the corresponding check box. If you would like the codes to be not displayed, unselect the corresponding check box. * These settings are not applied during digital tension editing mode. BAS H series...
-
Page 34: Initialization Method
2. USING THE LCD PANEL (ADVANCED OPERATIONS) 2-6. Initialization method Press the HOME key to switch to the home screen. [Home screen] Touch the Settings key (1) to switch to the setting menu screen. [Setting menu screen] Select "Data Management". Select "Format". BAS H series... - Page 35 Extended option program Place a check mark against the items you would like to initialize, and then touch the OK key (2) to start the initialization. When initialization is finished, the finished message screen will be displayed. BAS H series...
-
Page 36: Maintenance Mode
If you switch to maintenance mode, you can then move the machine head to the to the edge when carrying out adjustment, etc. [Home screen] Press the HOME key to switch to the home screen. [Setting menu screen] Select "Sewing Machine Adjustment". [Sewing Machine Adjustment Screen] Select "Maintenance". BAS H series... - Page 37 2. USING THE LCD PANEL (ADVANCED OPERATIONS) [Maintenance Screen] Press the left switch and the right switch simultaneously. The machine head will then move Remove both work clamp frame and feed plate, and turn off the power. BAS H series...
-
Page 38: Using Storage Media
(** is the cycle program Same as above number.) Panel setting values settings.db Same as above ISMSEQ**.SEQ Extended option data (** is the extended option Same as above number.) e*******.csv \BROTHER\ISM\ISMLDT\ Error log m*******.db (******* is the serial number.) BAS H series... -
Page 39: Importing And Exporting Data
[Setting menu screen] ・ If you select "Data Management" > "Import (Storage Media to Panel)", the display switches to the import screen. If you select "Data Management" > "Export (Panel to Storage Media)", it switches to the export screen. BAS H series... - Page 40 * To select and import only part of the sewing data, refer to the procedure in 3-4. [Export screen] [Items to export] Sewing data (all) Cycle program, user parameter Memory switch settings Panel settings, programmer settings Extended option program Error log BAS H series...
-
Page 41: Importing Items Of Sewing Data Separately
* If you would like to select multiple files, you can select files in multiple select mode. Touch to switch between multiple select and single select mode. * For details on other functions, please contact the place of purchase. BAS H series... - Page 42 INSTRUCTION MANUAL * Please note that the contents of this manual may differ slightly from the actual product purchased as a result of product improvements. © 2015, 2016, 2018 Brother Industries, Ltd. All Rights Reserved. BAS H series This is the original instructions.