Table of Contents
Advertisement
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
6. P (Park)
TIP
G
When in reverse, the reverse indicator light
should come on. If the indicator light does not
come on, have a Yamaha dealer check the elec-
trical circuit.
G
Due to the synchronizing mechanism in the en-
gine, the indicator light may not come on until the
ATV starts moving.
4. Check behind for people or obstacles, and
then release the brake pedal.
2
L
5. Open the throttle lever gradually and continue
to watch to the rear while backing.
3
H
EBU20682
4
N
Engine break-in
5
R
TIP
G
For ATVs equipped with an odometer or an hour
meter, follow the figures given in km (mi) or the
6
P
figures given in hours.
G
For ATVs not equipped with an odometer or
hour meter, follow the figures given in hours.
There is never a more important period in the life of
your engine than the first 320 km (200 mi) or 20
hours of riding. For this reason, you should read
the following material carefully.
Since the engine is brand new, do not put an ex-
cessive load on it for the first 320 km (200 mi) or 20
hours. The various parts in the engine wear and
polish themselves to the correct operating clear-
ances. During this period, prolonged full-throttle
operation or any condition that might result in en-
gine overheating must be avoided.
6-4
6
- Quick Links:
- Multi-Function Display
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
