Tilt Support Lever For Power Trim And Tilt Model - Yamaha F225 Owner's Manual
Hide thumbs
Also See for F225:
- Owner's manual (116 pages) ,
- Maintenance manual (36 pages) ,
- Owner's manual (81 pages)
Table of Contents
Advertisement
EWM00840
WARNING
An improperly adjusted trim tab could
cause difficult steering. Always test run af-
ter the trim tab has been installed or re-
placed to be sure steering is correct. Be
sure you have tightened the bolt after ad-
justing the trim tab.
If the boat tends to veer to the left (port side),
turn the trim tab rear end to the port side "A" in
the figure. If the boat tends to veer to the right
(starboard side), turn the trim tab end to the
starboard side "B" in the figure.
ECM00840
CAUTION:
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it will
become ineffective as an anode.
1. Trim tab
2. Bolt
Basic components
3. Cap
Bolt tightening torque:
42.0 Nm (31.0 ft-lb) (4.28 kgf-m)
EMU26341
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up po-
sition, lock the tilt support lever to the clamp
bracket.
23
Hide quick links:
Advertisement
Table of Contents
