hit counter script
JVC HR-XVC30US Service Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. DVD VCR Combo
  5. HR-XVC30US
  6. Service manual
JVC HR-XVC30US Service Manual

JVC HR-XVC30US Service Manual

Dvd player & video cassette recorder
Hide thumbs Also See for HR-XVC30US:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
DVD PLAYER & VIDEO CASSETTE RECORDER
HR-XVC30US, HR-XVC33UC,
HR-XVC33UM, HR-XVC33US,
HR-XVS44UC, HR-XVS44UJ,
HR-XVC30US,HR-XVC33UC,HR-XVC33UM,HR-XVC33US,HR-XVS44UC,HR-XVS44UJ,HR-XVS44US [D3PV1,D3PS1]
1
PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2
SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
3
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
4
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
5
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LIMITED
HR-XVS44US

TABLE OF CONTENTS

(S-VHS model)
(S-VHS model)
(VHS model)
(VHS model)
No.YD001
2003/10

Advertisement

Table of Contents
loading

Related Manuals for JVC HR-XVC30US

Summary of Contents for JVC HR-XVC30US

  • Page 1: Table Of Contents

    SERVICE MANUAL DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC30US, HR-XVC33UC, HR-XVC33UM, HR-XVC33US, HR-XVS44UC, HR-XVS44UJ, HR-XVS44US (S-VHS model) (S-VHS model) (VHS model) (VHS model) HR-XVC30US,HR-XVC33UC,HR-XVC33UM,HR-XVC33US,HR-XVS44UC,HR-XVS44UJ,HR-XVS44US [D3PV1,D3PS1] TABLE OF CONTENTS PRECAUTION............... . . 1-3 SPECIFIC SERVICE INSTRUCTIONS .
  • Page 2 SPECIFICATION HR-XVC30US,HR-XVC33US, HR-XVC33UM HR-XVS44US,HR-XVS44UC HR-XVS44UJ HR-XVC33UC GENERAL Power requirement AC 120 V, 60 Hz AC 110 - 120 V, 50 Hz/60 Hz AC 120 V, 60 Hz AC 110 - 120 V, 50 Hz/60 Hz Power consumption Power on 27 W...

  • Page 3: Precaution

    SECTION 1 PRECAUTION SAFTY PRECAUTIONS Prior to shipment from the factory, JVC products are strictly in- Consequently, when servicing these products, replace the spected to conform with the recognized product safety and elec- cathode ray tubes and other parts with only the specified trical codes of the countries in which they are to be parts.
  • Page 4 1.1.2 Safety Check after Servicing Examine the area surrounding the repaired location for damage (4) Leakage current test or deterioration. Observe that screws, parts and wires have been Confirm specified or lower leakage current between earth returned to original positions, Afterwards, perform the following ground/power cord plug prongs and externally exposed ac- tests and confirm the specified values in order to verify compli- cessible parts (RF terminals, antenna terminals, video and...
  • Page 5 Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.2.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as DVD players.
  • Page 6 Precautions for Service 1.3.1 Handling of Traverse Unit and Laser Pickup (1) Do not touch any peripheral element of the pickup or the actuator. (2) The traverse unit and the pickup are precision devices and therefore must not be subjected to strong shock. (3) Do not use a tester to examine the laser diode.

  • Page 7: Specific Service Instructions

    SECTION 2 SPECIFIC SERVICE INSTRUCTIONS Different table of feature The following table indicates main different points between models HR-XVC30US, HR-XVC33US, HR-XVC33UC, HR-XVC33UM, HR- XVS44US, HR-XVS44UC, and HR-XVS44UJ. HR-XVC30US HR-XVC33US HR-XVC33UC HR-XVC33UM HR-XVS44US HR-XVS44UC HR-XVS44UJ ← ← ← POWER VOLTAGE 120V / 60Hz...
  • Page 8 • For some models, the mechanism and board assem- 2.3.2 Setting the User RCU mode blies are attached by connectors only. When carrying (1) Turn off the power. out a diagnosis or repair of the boards in the "Service (2) Press the "REC" and "PAUSE" buttons of the VCR simul- position", make sure that the connectors are not dis- taneously.
  • Page 9 Maintenance and inspection 2.6.3 Suggested servicing schedule for main components The following table indicates the suggested period for such ser- 2.6.1 Cleaning vice measures as cleaning, lubrication and replacement. In prac- Regular cleaning of the transport system parts is desirable but tice, the indicated periods will vary widely according to practically impossible.

  • Page 10: Disassembly

    SECTION 3 DISASSEMBLY Removing the major parts 3.1.1 Destination of connectors 3.1.3 Disassembly procedure Two kinds of double-arrows in connection tables respectively Step/ Fig. Part Name Point Note show kinds of connector/wires. Loc No. : Flat wire : Wire : Board to board (B-B) Top cover 3-1d 6(S1a)
  • Page 11 <Note 3c> • When reattaching the Drum assembly, secure the screws (S3c to S3e) in the order of c, d, e. (S3c) (S3e) (S3d) (S3e) Mechanism (S3d) assembly Drum HOOK assembly (S3c) <Note 3c> <NOTE> Attach the Drum assembly appropriately, since the installation state of the Drum assembly influences the FM WAVEFORM LINEARITY greatly.
  • Page 12 (S1a) NOTE 1.Insert direction of FCC WIRE as follows. [1]Top cover right side back side (S1a) supporting side electrode side (S1a) 2.FFC WIRE and DRUM FPC WIRE should be insert as follows. 3.Insert the wire to even the root of connector completely (S1a) at the same time as inserting each wire.
  • Page 13 Loading mechanism assembly 3.2.1 Removing the tray (See Figure 3-2a, Figure 3-2b, Figure 3-2c, Figure 3-2d, Figure 3-2e, Figure 3-2f) (1) Push a of the slide cam on the hole in the right side of the Tray loading base by using a driver until it stops. (See Figure 3- 2a.) (2) The tray comes out.
  • Page 14 3.2.2 Removing the traverse mechanism assembly (See Figure 3-2g) Reverse the loading mechanism assembly. Remove the four Loading mechanism assembly screws B attaching the traverse mechanism assembly. Remove the traverse mechanism assembly upward. Traverse mechanism assembly Fig.3-2g 3.2.3 Removing the elevator (See Figure 3-2h and Figure 3-2j) •...
  • Page 15 3.2.4 Removing the loading motor (See Figure 3-2k and Figure 3-2l) • Prior to the following procedure, remove the tray, the traverse Loading base Belt mechanism assembly, and the elevator. (1) Remove the belt from the pulley. Pulley Slide cam Pulley (2) Remove two screws C attaching the loading motor.

  • Page 16: Adjustment

    SECTION 4 ADJUSTMENT Before adjustment 4.1.4 Color (colour) bar signal,Color (colour) bar pattern 4.1.1 Precaution Color(colour) bar signal [NTSC] Color(colour) bar pattern [NTSC] • The adjustments of this unit include the mechanism com- White(100%) (75%) patibility and electrical adjustments. During the perfor- White(75%) mance of this work, be sure to observe the precautions for each type of adjustment.
  • Page 17 4.1.6 Manual tracking mode (Auto tracking ON/OFF) set- 4.2 Mechanism compatibility adjustment (VHS SECTION) ting Notes: (1) In order to set to the manual tracking mode during tape • Although compatibility adjustment is very important, it playback, press the “SP/EP(LP)”button on the remote con- is not necessary to perform this as part of the normal trol unit.
  • Page 18 4.2.2 FM waveform linearity Proper waveform variation Signal (A1) • Alignment tape(SP, stairstep, NTSC) [MHP] (A2) • Alignment tape(EP,stairstep,NTSC) [MHP-L] Mode • PB Equipment • Oscilloscope Measuring point (D) • TP106 (PB. FM) External trigger (E) • TP111 (D.FF) Improper waveform variation Down Adjustment part (F) •...
  • Page 19 4.2.4 A/C head phase (X-value) 4.3 Electrical adjustment (VHS SECTION) Signal (A1) • Alignment tape(SP, stairstep, NTSC) [MHP] Note: (A2) • Alignment tape(EP,stairstep,NTSC) [MHP-L] The following adjustment procedures are not only necessary Mode • PB after replacement of consumable mechanical parts or board Equipment •...
  • Page 20 (4) Transmit the code (F) from the Jig RCU to adjust so that the 4.3.3 Syscon circuit [UM MODEL] noise bar becomes the specified value (G) on the TV Notes: monitor in the slow mode. • When perform this adjustment, remove the Mechanism (5) Set the VCR to the Stop mode.
  • Page 21 Electrical adjustment (DVD SECTION) 4.4.1 Test mode setting method (1) Press POWER button then press VCR/DVD repeatedly so that the DVD indicatorlights up. (2) Press the POWER button again to set the stand-by mode. (3) Transmit the code "FA" from the Jig RCU. (4) The FDP shows the test mode content in the form of "∗...
  • Page 22 4.4.5 Optimization adjustment of Front End parameter Adjustment to optimize Front End parameter must be performed in each mechanism assembly of this model for high-speed start- ing.Please perform optimization according to the following procedures just after all-initialization is completed and when FL display shows anything except "∗0"...
  • Page 23 4.4.7 Flap adjustment of the pick-up guide shaft Please perform flap adjustment of the pick-up guide shaft in the following case: • Just after you exchange the pick-up. • Just after you exchange the spindle motor. • Just after you exchange the traverse mechanism base. NOTE: Please perform flap adjustment of the pick-up guide shaft when you exchange the parts above and also when you remove the parts above.
  • Page 24 4.4.7.2 Preparation for adjustment (1) Remove the DVD unit.(Refer to the SECTION 3 Removing the major parts) (2) Connect a extention cord between CN502 of DVD servo control board assembly and CN7301 of Main board assembly. (See Fig.4-4a) (3) Connect a extention cord between CN501 of DVD servo control board assembly and CN5302...
  • Page 25 SECTION 5 TROUBLESHOOTING Manually removing the cassette tape (3) Unload the pole base assembly by manually turning the gear of the loading motor until the pole base assembly is If you cannot remove the cassette tape which is loaded because hidden behind the cassette lid.
  • Page 26 5.3 Emergency display function (VHS SECTION) EMG display of FDP display mode (1) Transmit the code “59” from the Jig RCU. This unit saves details of the last two emergencies as the EMG The FDP shows the EMG content in the form of “E:**:**”. history and allows the status of the VCR and the mechanism of each emergency to be shown both on the display and as OSD in- <Example 1>...
  • Page 27 Encoder data : Sensor information (See sensor information details.) GG : Capstan motor speed (See Mechanism mode sequence.) HH : Key code (JVC code) Remote pause : Supply reel winding diameter data higher 8 bits. End sensor : Supply reel winding diameter data lower 8 bits.
  • Page 28 5.3.4 EMG content description Note: EMG contents “E08/E09” are for the model with Dynamic Drum (DD). CONTENT CAUSE E01: Loading EMG If the mechanism mode does not change to the next mode within 4 sec- 1. The mechanism is locked in the middle of the mode transition during a tape loading operation. onds after the loading motor starts rotating in the loading direction, while 2.
  • Page 29 5.3.5 EMG detail information <1> *2 : Mechanism operation mode The status (electrical operation mode) of the VCR and the status [Table of MN*] (mechanism operation mode/sensor information) of the mecha- Display Mechanism operation mode nism in the latest EMG can be confirmed based on the figure in Command standby (No command to be executed) EMG detail information <1>...
  • Page 30 3- : Mechanism sensor information *5 : Cassette tape type <1> [Common table of MN* and HD*] Display Cassette tape type <1> Cassette type not iden ified Mechanism sensor informatio n Large reel/small reel (T-0 to T-15/T-130 to T-210) not classified Display Mechansim Small reel, thick tape (T-120) identified/thin tape (T-140) identified...
  • Page 31 Troubleshooting (DVD SECTION) Press OPEN /CLOSE key Is tray Confirmation of tray drive circuit operation and circuit in surrounding correct? Is the traverse moving See "5.5.3 Traverse movement error" along the innermost in "Check points for individual errors" perimeter for SW detection? "NO DISC"...
  • Page 32 Check points for each error (DVD SECTION) 5.5.1 Spindle start error (1) Defective spindle motor • Are there several ohms resistance between each pin of CN201 "1-2","2-3","1-3"? (The power supply is turned off and measured.) • Is the sign wave of about 100mVp-p in the voltage had from each terminal? [ CN201"10"(H1+),"11"(H1-),"7"(H2+),"8"(H2-),"5"(H3+),"6"(H3-) ] (2) Defective spindle motor driver (IC251) •...
  • Page 33 5.5.6 Spindle CLV NG • IC101 -- "30"(ARF-), "31(ARF+). • Does not the input or the output of driver's spindle signal do the grip? • Has the tracking been turned on? • Spindle motor and driver is defective. • Additionally, "IC101 and IC301"...
  • Page 34 JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. www.jvcservice.com(US Only) JVC CANADA INC. Head office : 21 Finchdene Square Scarborough, Ontario M1X 1A7 (416)293-1311 (No.YD001) Printed in Japan...
  • Page 35 DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC33U For Customer Use: Enter below the Model No. and Serial No. which are located on the INSTRUCTIONS rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0853-001B...
  • Page 36 CAUTION: Dear Customer, Thank you for purchasing the JVC DVD player & VHS video THIS PRODUCT USES A LASER SYSTEM. cassette recorder. Before use, please read the safety USE OF CONTROLS OR ADJUSTMENTS OR information and precautions to ensure safe use of your new PERFORMANCE OF PROCEDURES OTHER THAN unit.
  • Page 37 Use only discs marked with the following. 2. DO NOT block the unit’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to (8 cm /12 cm disc) get out.) 3.
  • Page 38 IMPORTANT PRODUCT SAFETY 5. Ventilation Slots and openings in the cabinet are provided for ventilation. To INSTRUCTIONS ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. ● Do not block the openings by placing the product on a bed, Electrical energy can perform many useful functions.
  • Page 39 SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked ● Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table.

  • Page 40: Troubleshooting

    CONTENTS DISC INFORMATION EDITING (VCR DECK) About Discs ............7 Edit From A Camcorder ........68 Edit To Or From Another Video Recorder ..69 INDEX Dubbing (from DVD to VCR) ......70 EDITING (DVD DECK) INSTALLING YOUR NEW UNIT Digital Audio Dubbing ........

  • Page 41: Disc Information

    DISC INFORMATION Unplayable Discs About Discs The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
  • Page 42 DISC INFORMATION (cont.) DVD VIDEO Marks File Structure of Discs Sometimes marks are printed on a DVD disc and/or on its DVD VIDEO packaging to indicate information regarding the contents and Typically, DVD VIDEO discs are made up of larger units called functions of a disc.
  • Page 43 Placing a Disc Care and Handling of Discs How to handle discs Open the disc tray. When handling a disc, do Press OPEN/CLOSE (x) on the DVD deck to open the not touch the surface of the disc tray. disc. Since discs are made of plastic, they are easily damaged.

  • Page 44: Index

    INDEX FRONT VIEW A Power Button (POWER (1)) pg. 18 K Video/Audio Input Connectors (VIDEO/AUDIO) B VCR Indicator pg. 28, 33 pg. 68 C VHS Cassette Loading Slot L Remote Sensor D VCR/DVD Button M Front Display Panel pg. 28, 33, 42 pg.
  • Page 45 REAR VIEW A Region Number Label F Digital Audio Output Connector pg. 7 B AC Power Cord pg. 14 (DIGITAL AUDIO OUT) pg. 71 C S-video Output Connector (S VIDEO OUTPUT)* G Audio Output Connectors (AUDIO OUTPUT pg. 15 (L/R))* * This connector is only for DVD deck only.
  • Page 46 INDEX (cont.) ON-SCREEN DISPLAY (VCR deck) If you press DISPLAY on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 76), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to “Using the on-screen bar” ( pg.
  • Page 47 48 The Remote can operate most of your unit’s functions, as well Title Button (TITLE) pg. 64 as basic functions of TV sets of JVC and other brands. F Start Time Button (START +/–) pg. 36 pg. 73) Repeat Button (REPEAT) pg.

  • Page 48: Installing Your New Unit

    INSTALLING YOUR NEW UNIT Basic Connections Connect the unit to TV. The connection method you use depends on the type of TV you have. Antenna or Cable RF Connection 8 To connect to a TV with NO AV input connectors — Coaxial cable A Disconnect the TV antenna from the TV.

  • Page 49: S-Video Connection (Dvd Deck Only)

    8 To connect to a TV with S-VIDEO/AUDIO input S-VIDEO connectors . . . Connection Connect the unit to TV. A Connect the antenna, unit and TV as per “AV Connection”. ( pg. 14) B Connect the unit’s S VIDEO OUTPUT (DVD) (DVD deck only) connector to the TV’s S-VIDEO input connector.
  • Page 50 INSTALLING YOUR NEW UNIT (cont.) 8 To connect to a TV with component video input Component Video connectors . . . Connection Connect the unit to TV. A Connect the aerial, unit and TV as per “AV Connection”. ( pg. 14) B Connect the unit’s COMPONENT VIDEO OUT (DVD deck only) connectors to the TV’s component video input...

  • Page 51: Initial Settings

    INITIAL SETTINGS This unit sets the clock and tuner channels automatically Plug & Play Set when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. Auto Clock Set/Auto Tuner Set The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.

  • Page 52: Monitor Set (Dvd Deck)

    INITIAL SETTINGS (cont.) Monitor Set Turn on the unit. Press POWER (1). (DVD deck) Select the DVD deck. You can select the monitor type depending the TV used On the unit when you play back DVD VIDEO discs recorded for Press VCR/DVD repeatedly so that the DVD indicator wide-screen TVs.
  • Page 53 * The default setting is bold in the table below. Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen 8 MONITOR TYPE TV with 16:9 aspect ratio. 16:9 NORMAL (Wide television conversion): Material with this ratio will not fit to a TV with 4:3 aspect Select this when the aspect ratio of your TV is ratio.

  • Page 54: Language

    INITIAL SETTINGS (cont.) On-screen Language Set (VCR deck) Language This VCR deck offers you the choice to view on-screen messages in 3 different languages. ● Turn on the TV and select the VCR channel (or AV Turn on the unit. mode).
  • Page 55 On-screen Language Set (DVD deck) This DVD deck offers you the choice to view on-screen messages in 3 different languages. You can change the language setting manually as required. Turn on the unit. Press POWER (1). Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up.
  • Page 56 INITIAL SETTINGS (cont.) Menu/Audio/Subtitle Language Set (DVD deck only) Some DVD discs contain the DVD menu display, audio, subtitle in the multiple languages. With these discs, you can set the default language as you like. ● The procedure shows how to set “MENU LANGUAGE” on the DVD Set Up menu screen as an example.
  • Page 57 Language Code List Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Russian Ameharic Hebrew Kinyarwanda Arabic Yiddish Sanskrit Assamese Javanese Sindhi Aymara Georgian Sangho Azerbaijani Kazakh Serbo-Croatian Bashkir Greenlandic Singhalese Byelorussian Cambodian Slovak Bulgarian Kannada Slovenian Bihari Korean (KOR) Samoan Bislama Kashmiri Shona...

  • Page 58: Clock Set

    INITIAL SETTINGS (cont.) Perform clock setting only if the clock has not been set Clock Set correctly by the Plug&Play setting. Preparations ● Turn on the TV and select the VCR channel (or AV mode). Turn on the unit. ● Slide the TV/VCR/DVD switch to the right. Press POWER (1).
  • Page 59 Semiauto Clock Set Complete the Semiauto Clock Set. You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps A to E in Press SET UP MENU to return to normal screen. “Preparations” ( pg. 24), then go to the following steps. NOTE: IMPORTANT The time set previously will be erased when “AUTO CLOCK”,...

  • Page 60: Tuner Set

    INITIAL SETTINGS (cont.) Auto Channel Set Tuner Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. ● Turn on the TV and select the VCR channel (or AV Turn on the unit. mode).
  • Page 61 Manual Channel Set You can add the channels you want or delete the channels you do not want manually. Turn on the unit. Press POWER (1). Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up.

  • Page 62: Operations On Vcr Deck

    OPERATIONS ON VCR DECK Basic Playback Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is ● Turn on the TV and select the VCR channel (or AV pointed toward the unit.

  • Page 63: Playback Features

    Still Picture/Frame-By-Frame Playback Features Playback Pause during playback. ● Turn on the TV and select the VCR channel (or AV Press PAUSE (9). mode). ● If there is vertical jitter, press CH +/– on the Remote to correct ● Slide the TV/VCR/DVD switch to the right. the picture.
  • Page 64 OPERATIONS ON VCR DECK (cont.) Index Search Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the unit is in the Stop mode.
  • Page 65 Next Function Memory The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. a- For Automatic Start Of Playback Press REW (3), then press PLAY (4) within 2 seconds.
  • Page 66 OPERATIONS ON VCR DECK (cont.) Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons. Override automatic tracking. During playback, press SP/EP on the Remote. Adjust the tracking manually.

  • Page 67: Basic Recording

    Basic Recording Load a cassette. Insert a cassette with the record safety tab intact. ● The unit’s power comes on automatically and the counter is reset to 0:00:00. ● Turn on the TV and select the VCR channel (or AV mode).

  • Page 68: Recording Features

    OPERATIONS ON VCR DECK (cont.) Record One Program While Watching Recording Features Another If your unit is connected to the TV via the AV connection, press TV/VCR. The unit’s VCR indicator and the TV ● Turn on the TV and select the VCR channel (or AV broadcast being recorded disappear.
  • Page 69 Elapsed Recording Time Indication Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. Reset the counter. Press C.RESET before starting recording or playback. ● The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.

  • Page 70: Express Timer Programing

    OPERATIONS ON VCR DECK (cont.) Example: To timer-record the program from 8:00 to Express Timer 10:00 on 24th December, on channel 12. Programing Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. Before performing Express Timer Programing: ●...
  • Page 71 NOTES: Enter the channel position. ● You can program this unit to timer-record as many as 8 programs. If you try to program the unit to record a ninth, Press CH +/–. “PROGRAM FULL” appears on the TV screen. To record the extra program, you must first cancel any unnecessary programs.
  • Page 72 OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs Disengage the timer mode. Press TIMER, then press POWER (1). Access the Program Check screen. Press PROG. CHECK. Access the Program screen. Press PROG. CHECK again to check more information. Each time you press PROG.
  • Page 73 To cancel or change a program Cancel or change a program. Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/–, STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/EP. Return to the normal screen.
  • Page 74 OPERATIONS ON VCR DECK (cont.) When programs overlap each other If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. Example: Program 1 (you have just made) and Program 4 overlap each other.

  • Page 75: Satellite Auto Recording

    Satellite Auto ATTENTION ● Be sure not to turn on the DBS receiver before the program is executed; otherwise, the unit will start recording when Recording the DBS receiver’s power is turned on. ● If you have connected another appliance other than a DBS receiver to the AUDIO/VIDEO input (F-1) connector, be sure not to engage the Satellite Auto Recording mode;...

  • Page 76: Operations On Dvd Deck

    OPERATIONS ON DVD DECK To play back a MP3/JPEG disc, see pages 62 – 67. Basic Playback Load the disc. A Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. ● The unit’s power comes on automatically. B Place the disc in the disc tray.

  • Page 77: Playback Features

    Locating a desired scene using the Playback Features DVD menu ● Turn on the TV and select the VCR channel (or AV mode). DVD VIDEO discs may have two types of the menus; top menu ● Slide the TV/VCR/DVD switch to the right. and disc menu.
  • Page 78 OPERATIONS ON DVD DECK (cont.) Locating the start point of the item or skip the item Press SKIP (2) or SKIP (6) during playback. Example: To locate the beginning of item B from the current position, press SKIP (2) twice. To locate the beginning of item D from the current position, press SKIP (6) once.
  • Page 79 Still Picture/Frame-By-Frame Resume playback. Press PLAY (4). The unit start playback from the resume Playback point. ● “RESUME PLAY” appears on the front display panel. Pause during playback. NOTES: Press PAUSE (9). ● Resume Function does not work on the Audio CD. It also may Activate frame-by-frame playback.
  • Page 80 OPERATIONS ON DVD DECK (cont.) ● Each time you press w e, the setting changes as follows: NONE]ACTION]DRAMA]THEATER](Back to the beginning) NONE No effect ACTION Suitable for action movies and sports programs in which sounds dynamically move. DRAMA Provides the natural and warm sound. You can enjoy movies in a relaxed mood.
  • Page 81 VFP function Select the parameter. Press rt repeatedly to select a parameter you want to — Adjusting the picture quality adjust, then press OK. ● Adjust gradually and confirm picture appearance results are as preferred. GAMMA Controls brightness of neutral tints while (–4 to +4): maintaining brightness of dark and bright The VFP (Video Fine Processor) function enables you to adjust...

  • Page 82: Using The On-Screen Bar

    OPERATIONS ON DVD DECK (cont.) How to Access the on-screen bar Using the on- Press PLAY SETUP twice whenever a disc is loaded. screen bar Example: During DVD VIDEO playback Example: During Video CD playback You can check disc information while the disc is loaded and you can use some functions using the on-screen bar.
  • Page 83 Basic operation on the on-screen bar Change the time information Example: When selecting the Repeat mode of DVD During playback or while stopped You can change the time information in the on-screen bar on the TV screen and the front display panel of the unit. Access the on-screen bar.
  • Page 84 OPERATIONS ON DVD DECK (cont.) Select the repeat mode. Press rt repeatedly to select the Repeat mode, then press OK. ● The mode changes as follows: DVD VIDEO CHAPTER]TITLE]A-B]OFF](Back to the beginning) CHAPTER The current chapter is played back repeatedly. TITLE The current title is played back repeatedly.
  • Page 85 A-B Repeat Playback Time Search You can repeat the desired part. You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time Access the on-screen bar.
  • Page 86 OPERATIONS ON DVD DECK (cont.) Chapter Search You can start playback the desired chapter using the on-screen bar. Access the on-screen bar. Press PLAY SETUP twice. The on-screen bar appears on the TV screen. Select menu item. Press w e to move 0 to , then press OK.
  • Page 87 Program Playback Random Playback You can play back up to 99 tracks in the desired order. You can play back all the tracks on the disc in random order. Access the on-screen bar. Access the on-screen bar. Press PLAY SETUP twice in stop mode. Press PLAY SETUP twice in stop mode.
  • Page 88 OPERATIONS ON DVD DECK (cont.) Select the subtitle language. Press rt repeatedly to select the desired subtitle language, then press OK. ● Each time you press the button, the subtitle language changes. To clear the on-screen bar Press PLAY SETUP. NOTES: ●...
  • Page 89 Angle Selection When using the ANGLE button: Access the menu. Press ANGLE. You can enjoy a variety of scene angles if the DVD VIDEO disc ● The following pop-up window appears on the TV screen. contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles.
  • Page 90 OPERATIONS ON DVD DECK (cont.) Select menu item. Press w e to move 0 to , then press OK. ● The following pop-up window appears under the selected item. Example: “ENGLISH” is selected out of 4 audio languages recorded. Select the audio language. Press rt repeatedly to select the desired audio language, then press OK.
  • Page 91 Audio Channel Selection When using the A.MONITOR button: Access the menu. Press A.MONITOR. When you play certain karaoke (DVD/Video CD/SVCD), you can ● The following pop-up window appears on the TV screen. enjoy karaoke by selecting the audio channel to play. Example: “ST”...

  • Page 92: Parental Lock

    OPERATIONS ON DVD DECK (cont.) Parental Lock Access the DVD Set Up menu. A Press SET UP MENU. This function restricts playback of DVD VIDEO discs which B Press w e to select “ OTHERS”. contain violent (and other) scenes according to the level set by the user.
  • Page 93 Enter the password. Enter your new password. Press the number keys to Press the appropriate number keys to enter 4-digit enter a four-digit number as PARENTAL LOCK password, then press OK. COUNTRY CODE your password, then press ● The password entered in the this step becomes the new SET LEVEL PASSWORD password.
  • Page 94 OPERATIONS ON DVD DECK (cont.) Country/Area Code List for Parental Lock Andorra Spain United Arab Emirates Ethiopia Afghanistan Finland Antigua and Barbuda Fiji Anguilla Falkland Islands (Malvinas) Albania Micronesia (Federated States of) Armenia Faroe Islands Netherlands Antilles France Angola France, Metropolitan Antarctica Gabon Argentina...
  • Page 95 Saint Lucia Saudi Arabia Liechtenstein Solomon Islands Sri Lanka Seychelles Liberia Sudan Lesotho Sweden Lithuania Singapore Luxembourg Saint Helena Latvia Slovenia Libyan Arab Jamahiriya Svalbard and Jan Mayen Morocco Slovakia Monaco Sierra Leone Moldova, Republic of San Marino Madagascar Senegal Marshall Islands Somalia Mali...

  • Page 96: About Mp3 Disc

    OPERATIONS ON DVD DECK (cont.) NOTES: About MP3 Disc ● Because of the disc characteristics or recording condition, some discs may not be played back or it takes time to start playback. This unit can playback CD discs recorded by the MP3 format (we ●...

  • Page 97: Mp3 Playback

    Using the MP3 control display MP3 Playback Turn on the unit. Press POWER (1). You can search and play back desired groups and tracks using the MP3 control display. Select the DVD deck. ● Turn on the TV and select the VCR channel (or AV On the unit mode).
  • Page 98 OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, track or all groups. ● While MP3 control display is on the TV: Access the repeat mode. Press PLAY SETUP during playback. ● The current repeat mode is displayed on the MP3 control display.

  • Page 99: About Jpeg Disc

    NOTES: About JPEG Disc ● We recommend to record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a longer time to be displayed.) This unit can playback CD discs recorded by the JPEG format ●...

  • Page 100: Jpeg Playback

    OPERATIONS ON DVD DECK (cont.) Using the JPEG control display JPEG Playback Turn on the unit. Press POWER (1). You can search and play back desired groups and files using the JPEG control display. Select the DVD deck. ● Turn on the TV and select the VCR channel (or AV On the unit mode).
  • Page 101 Repeat Playback You can repeat playback of the current group, file or all groups. ● While JPEG control display is on the TV: Access the repeat mode. Press PLAY SETUP while the JPEG Control screen is displayed. ● The current repeat mode is displayed on the JPEG control display.

  • Page 102: Editing (Vcr Deck)

    EDITING (VCR DECK) You can use a camcorder as the source player and your Edit From A unit as the recording deck. Slide the TV/VCR/DVD switch to the right. Camcorder Make connections. Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

  • Page 103: Edit To Or From Another Video Recorder

    You can use your unit as the source player or as the Edit To Or From recording deck. Slide the TV/VCR/DVD switch to the right. Another Video Make connections. Recorder A When using your unit as the source player ..

  • Page 104: Dubbing (From Dvd To Vcr)

    EDITING (VCR DECK) (cont.) You can dub selected scenes from the DVD disc to a cassette, Dubbing starting and stopping wherever you wish. However, it is not possible to dub the copy-protected disc. In such case, “ERROR” appears on the front display panel. (from DVD to VCR) Load a cassette and place a disc.

  • Page 105: Editing (Dvd Deck)

    EDITING (DVD DECK) You can dub selected audio from the DVD or Audio CD disc to a Digital Audio MD etc. However, it is not possible to dub the copy-protected disc. Example: Dubbing to a MD Dubbing Make connections. Connect the optical cable between the unit and the ●...

  • Page 106: Remote

    “4” for D. Remote A/B/C/D Code Switching Set the remote control code. The Remote is capable of controlling four JVC video units Press OK to set the code. independently. Each of units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code...
  • Page 107 SONY SAMSUNG SANYO SEARS TOSHIBA ZENITH IMPORTANT Although the supplied remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

  • Page 108: Connecting To A Dolby Digital Decoder Or An Amplifier With A Built-In Dts (Dvd Deck Only)

    REMOTE (cont.) Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS. DIGITAL AUDIO OUT Back of unit Dolby Digital decoder or To DIGITAL AUDIO amplifier with a built-in DTS...

  • Page 109: Subsidiary Settings

    SUBSIDIARY SETTINGS You can change various mode settings on the Function Mode Set Set screen by following the procedure described below. ● For each mode setting, see pages 76 to 77. (VCR deck) Turn on the unit. Press POWER (1). ●...
  • Page 110 SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. 8 PICTURE CONTROL This feature helps you to adjust the playback picture quality according to your preference. Normally select “NORM”. NORM EDIT NORM: Picture quality is adjusted automatically. SOFT EDIT: Minimizes picture degradation during editing (recording and playback).
  • Page 111 * The default setting is bold in the table below. 8 VIDEO STABILIZER When this function is set to “ON”, you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder. NOTES: ● When you finish viewing a tape, be sure to set this function to “OFF”. ●...

  • Page 112: Mode Set (Dvd Deck)

    SUBSIDIARY SETTINGS (cont.) ● The procedure shows how to set “RESUME” to “ON” Mode Set on the DVD Set Up menu screen as an example. Turn on the unit. (DVD deck) Press POWER (1). ● Turn on the TV and select the VCR channel (or AV Select the DVD deck.
  • Page 113 Picture Settings * The default setting is bold in the table below. 8 MONITOR TYPE You can select the monitor type depending the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to 16:9 NORMAL “Monitor Set (DVD deck)”...
  • Page 114 SUBSIDIARY SETTINGS (cont.) 8 ANALOG DOWN MIX Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This DOLBY SURROUND setting affects only the analogue audio output signal from the AUDIO OUTPUT STEREO connectors (DVD) when playing back a DVD VIDEO disc recorded with surround multichannel audio.
  • Page 115 Output Playback discs STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD VIDEO with 48 kHz, 16/20/24 bit linear 48 kHz, 16 bit linear PCM DVD VIDEO with DTS DTS bitstream 44.1 kHz, 16 bit stereo linear PCM DVD VIDEO with Dolby 48 kHz, 16 bit stereo linear Dolby Digital bitstream Digital Audio CD/Video CD...

  • Page 116: Child Lock

    SUBSIDIARY SETTINGS (cont.) Child Lock Scan Mode Set (DVD deck) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. ● Turn on the TV and select the VCR channel (or AV You can disable the unit’s operation.
  • Page 117 ● The video heads may be dirty. 5. The playback picture is blurred or Use a dry cleaning cassette ECL-3F, or interrupted while TV broadcasts are consult your JVC dealer. clear or “USE CLEANING CASSETTE” message appears on the screen. ● The automatic tracking mode is 6.
  • Page 118 TROUBLESHOOTING (cont.) PLAYBACK (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● The operation is prohibited on the 1. The button do not work. — placed disc. ● The DVD deck is not selected. 2. The DVD deck can not be operated. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up.
  • Page 119 MP3 Playback (DVD deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● No MP3 files are recorded to the disc. 1. A disc cannot be played. Replace the disc. ● MP3 files do not have the correct file Add correct file extension (.mp3, .MP3 or extension in their file names.
  • Page 120 TROUBLESHOOTING (cont.) TIMER RECORDING (VCR deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● The clock and/or the timer have been 1. Timer recording won’t work. Re-perform the clock and/or timer set incorrectly. settings. ● The timer is not engaged. Press TIMER and confirm that “#” is displayed on the front display panel.
  • Page 121 OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● The unit leaves turned on and the DVD 1. The image of TV broadcast appears Turn off the unit, or press VCR to select the distorted on the TV screen. deck is selected. VCR deck, then press TV/VCR so that the VCR indicator disappears from the front display panel.

  • Page 122: Questions And Answers

    QUESTIONS AND ANSWERS PLAYBACK TIMER RECORDING Q. What happens if the end of the tape is reached Q. “ ” and “#” remain lit on the front display during playback or search? panel. Is there a problem? A. The tape is automatically rewound to the A.

  • Page 123: Specifications

    SPECIFICATIONS GENERAL TUNER Power requirement : AC 120 V , 60 Hz Tuning system : Frequency synthesized tuner Power consumption Channel coverage Power on : 27 W : Channels 2 – 13 Power off : 3.1 W : Channels 14 – 69 Temperature CATV : 113 Channels...

  • Page 124: List Of Terms

    LIST OF TERMS ..........51 ............20 A-B Repeat Playback Language .......... 23 About Discs Language Code List .............. 65 JPEG Menu/Audio/Subtitle Language Set .............. 62 ........22 (DVD deck only) ..........9 ....21 Placing a Disc On-screen Language Set (DVD deck) ..........
  • Page 125 ............19 .......... 12 Pan&Scan Tape Position Indicator ........... 35 Parental Lock Tape Remaining Time ........60 ............51 Country/Area Code List Time Search ........59 ..........36 To change the settings Timer Recording – ....58 ............43 To set Parental Lock for the first time Top menu ....

  • Page 126: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.

  • Page 127: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.
  • Page 128 MEMO...
  • Page 130 Printed in Beijing 0803-TY-ID-BJ...
  • Page 131 DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVS44U For Customer Use: Enter below the Model No. and Serial No. which are located on the INSTRUCTIONS rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0856-001B...
  • Page 132 CAUTION: Dear Customer, Thank you for purchasing the JVC DVD player & S-VHS video THIS PRODUCT USES A LASER SYSTEM. cassette recorder. Before use, please read the safety USE OF CONTROLS OR ADJUSTMENTS OR information and precautions to ensure safe use of your new PERFORMANCE OF PROCEDURES OTHER THAN unit.
  • Page 133 Use only discs marked with the following. 2. DO NOT block the unit’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a (8 cm /12 cm disc) newspaper or cloth, etc., the heat may not be able to get out.) 3.
  • Page 134 IMPORTANT PRODUCT SAFETY 5. Ventilation Slots and openings in the cabinet are provided for ventilation. To INSTRUCTIONS ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. ● Do not block the openings by placing the product on a bed, Electrical energy can perform many useful functions.
  • Page 135 SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked ● Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table.
  • Page 136 CONTENTS DISC INFORMATION EDITING (VCR DECK) About Discs ............7 Edit From A Camcorder ........68 Edit To Or From Another Video Recorder ..69 INDEX Dubbing (from DVD to VCR) ......70 EDITING (DVD DECK) INSTALLING YOUR NEW UNIT Digital Audio Dubbing ........

  • Page 137: Disc Information

    DISC INFORMATION Unplayable Discs About Discs The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
  • Page 138 DISC INFORMATION (cont.) DVD VIDEO Marks File Structure of Discs DVD VIDEO Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and Typically, DVD VIDEO discs are made up of larger units called functions of a disc.
  • Page 139 Placing a Disc Care and Handling of Discs How to handle discs Open the disc tray. When handling a disc, do Press OPEN/CLOSE (x) on the DVD deck to open the not touch the surface of the disc tray. disc. Since discs are made of plastic, they are easily damaged.
  • Page 140 INDEX FRONT VIEW A Power Button (POWER (1)) pg. 18 K S-Video/Video/Audio Input Connectors B VCR Indicator pg. 28, 32 (S-VIDEO/VIDEO/AUDIO) pg. 68 C VHS Cassette Loading Slot L Remote Sensor D VCR/DVD Button M Front Display Panel pg. 28, 32, 42 pg.
  • Page 141 REAR VIEW A Region Number Label F Digital Audio Output Connector pg. 7 B AC Power Cord pg. 14 (DIGITAL AUDIO OUT) pg. 71 C S-Video/Video/Audio Input Connectors G Audio Output Connectors (AUDIO OUTPUT (S-VIDEO/VIDEO/AUDIO INPUT (L-1)) (L/R))* pg. 41, 69 * These are analogue audio output connectors for DVD deck only.

  • Page 142: Index

    INDEX (cont.) ON-SCREEN DISPLAY (VCR deck) If you press DISPLAY on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 77), various operational indicators appear on the TV screen. For On-screen display for DVD deck, refer to “Using the on-screen bar” ( pg.
  • Page 143 48 The Remote can operate most of your unit’s functions, as well Title Button (TITLE) pg. 64 as basic functions of TV sets of JVC and other brands. F Start Time Button (START +/–) pg. 36 pg. 73) Repeat Button (REPEAT) pg.

  • Page 144: Installing Your New Unit

    INSTALLING YOUR NEW UNIT Basic Connections Connect the unit to TV. The connection method you use depends on the type of TV you have. Antenna or Cable RF Connection 8 To connect to a TV with NO AV input connectors — Coaxial cable A Disconnect the TV antenna from the TV.

  • Page 145: S-Video Connection

    8 To connect to a TV with S-VIDEO/AUDIO input S-VIDEO connectors . . . Connection Connect the unit to TV. A Connect the antenna, unit and TV as per “RF Connection”. ( pg. 14) B Connect an optional audio cable between the AUDIO OUTPUT connectors on the rear panel of the unit and Antenna or Cable the TV’s audio input connectors.

  • Page 146: Component Video Connection (Dvd Deck Only)

    INSTALLING YOUR NEW UNIT (cont.) 8 To connect to a TV with component video input Component Video connectors . . . Connection Connect the unit to TV. A Connect the aerial, unit and TV as per “AV Connection”. ( pg. 14) B Connect the unit’s COMPONENT VIDEO OUT (DVD deck only) connectors to the TV’s component video input...

  • Page 147: Initial Settings

    INITIAL SETTINGS This unit sets the clock and tuner channels automatically Plug & Play Set when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. Auto Clock Set/Auto Tuner Set The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.

  • Page 148: Remote

    INITIAL SETTINGS (cont.) Monitor Set Turn on the unit. Press POWER (1). (DVD deck) Select the DVD deck. You can select the monitor type depending the TV used On the unit when you play back DVD VIDEO discs recorded for Press VCR/DVD repeatedly so that the DVD indicator wide-screen TVs.
  • Page 149 * The default setting is bold in the table below. Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen 8 MONITOR TYPE TV with 16:9 aspect ratio. 16:9 NORMAL (Wide television conversion): Material with this ratio will not fit to a TV with 4:3 aspect Select this when the aspect ratio of your TV is ratio.
  • Page 150 INITIAL SETTINGS (cont.) On-screen Language Set (VCR deck) Language This VCR deck offers you the choice to view on-screen messages in 3 different languages. ● Turn on the TV and select the VCR channel (or AV Turn on the unit. mode).

This manual is also suitable for:

Hr-xvc33ucHr-xvc33umHr-xvc33usHr-xvs44ucHr-xvs44ujHr-xvs44us

Table of Contents