Table of Contents
Advertisement
Saving stitch settings
If you wish to save specific settings for a stitch so that they can
be used later, press
after changing the settings to save the
new settings with the selected stitch.
This feature can be used only with utility stitches.
To use a stitch length of 2.0 mm for the straight stitch
a
Select a straight stitch.
b
Set the stitch length to 2.0 mm.
c
Press
.
• To reset the selected stitch pattern back to its default
settings, press
, and then press
Note
• The next time that the same straight stitch is
• Both of the stitch width (zigzag width) and stitch
.
selected, the stitch length is set to 2.0 mm.
length are saved, not just the setting that was
changed. When the same stitch pattern is
selected, the last settings saved are displayed
even if the machine was turned off. If the settings
are changed again, or if
the setting to its default, the new settings are not
saved unless
is pressed another time.
Even if
is pressed, the settings for
programmed thread cutting and automatic
reverse/reinforcement stitching cannot be reset.
Basic operations B-41
Setting the Stitch
B
is pressed to reset
Advertisement
Table of Contents
Troubleshooting
