Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Marketing Name / Model
[List multiple models if applicable.]
Product Name
Model:
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of
HP products to remove components and materials requiring selective treatment.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit Assemblies
(PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB / PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink, including
liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing radioactive
substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring
selective treatment can be removed.
Tool Description
Torx screw drivers
Flat Blade Screwdriver
Description #3
Description #4
Description #5
Product Category - Servers
HP Integrity Superdome X
BL920s Gen8
Notes
Server is configurable and may contain some of the
following assemblies.
AT068-2001G(AT068A)
743824-001, IVB-EX E7-2890v2 2.8GHz/15
Core/37.5M
712384-081 DIMM,32GB PC3-14900L,1Gx
655639-B21 BLOM 10Gb NIC
655637-001 BLOM PCIeG2x8 2p 10Gb KR
665244-001 PCA MEZZ PCIeG2x8 2p 10GE
710608-B21 HP QMH2672 16Gb FC HBA
AH337-60502, Upper Midplane
013585-001, Lower Signal Midplane
AH337-60405, DVD Module
AH337-60604, GPSM
408439-502, Assy Fan PCA
012913-502, PCA, PWR MOD
012958-502, PCA, LCD Blindmate Paddle
012955-601, PCA, LCD Pass Thru Crd-Edge
407295-502, Assy, Management Sleeve
AH341-60401, XFM
AH389-60003, Onboard Administrator
C8S47-63001 Interconnect
538113-B21 Interconnect
711307-B21 Interconnect
All types including standard alkaline and lithium coin or
button style batteries
1420-0524 (NVRAM) Blade
M4T28-BR12SH1TR OA
For example, mercury in lamps, display backlights, scanner
lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Per Power Supply
Include the cartridges, print heads, tubes, vent chambers,
and service stations.
Tool Size (if applicable)
T6, T10, T15 & T25
Quantity of items
included in
product
310
(maximum)
20
(maximum)
2 or 4
Advertisement
Related Manuals for HP BL920s Gen8
Summary of Contents for HP BL920s Gen8
- Page 1 BL920s Gen8 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment. 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment.
- Page 2 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Compute enclosure front components (See Figure 1) 2. Compute Enclosure Rear Components (See Figure 2) 3. Remove power supplies Press the release button •...
- Page 3 14. Disassemble midplane brick Remove status panel PCA (See Figure 15) • Remove Air Valve assemblies • o Remove 3 screws from each side. Lift out the air valve assemblies (See Figure 16) • Remove Fan PCAs o Disconnect cables to the 3 Fan PCA’s. Remove 3 screws from each fan PCA. o Remove PCAs (See Figure 17) Unlatch DVD Cable (See Figure 18) •...
- Page 4 Item Description 1 thru 6 Power Supply Bay 7-12 DVD Module 9 & 10 Power Supply Bay 6-5 Insight Display 12 thru 15 Power Supply Bay 4 – 1 Blade slots FIGURE 1 Item Description AC power connectors (upper) 2-11 Fan bay 1 –...
- Page 5 FIGURE 3 FIGURE 4...
- Page 6 FIGURE 5 FIGURE 6 FIGURE 7...
- Page 7 FIGURE 8 • Two batteries, item number 11 in above drawing FIGURE 9 FIGURE 10...
- Page 8 FIGURE 11 There are ac input modules at the top and bottom of the enclosure FIGURE 12 FIGURE 13...
- Page 9 FIGURE 14 FIGURE 15 FIGURE 16...
- Page 10 FIGURE 17 Depress DVD connector latch, slide connector to the right and push it backwards to disengage it from the airframe. FIGURE 18 Upper Midplane Qty 10 Lower Midplane Qty 10 Remove screws and set aside for reuse. FIGURE 19...
- Page 11 Remove upper and lower airframes. Remove last midplane screw. Remove midplanes Unplug cables (3 plc) Unplug cables (4 plc) Remove midplanes. Remove these four cables. Note the cable routing through the cable clips. Leave these 2 cables attached at the bus bar. FIGURE 20 Leaving the cables attached to the busbar assemblies, lift out the busbar assemblies...
- Page 12 FIGURE 22...
- Page 13 FIGURE 23...