Page 1
The model number and serial number are on the back and underside of your Sound Bar. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this Sound Bar. Model name____________________________ Serial number___________________________ SB93719S-SW_IB.indd 1...
Contents Introduction ..................6 Safety icons used in this manual............6 Sound Bar speaker system controls ............7 Remote control ..................8 Sound Bar speaker system placement ..........10 Sound Bar speaker system connections ..........11 Troubleshooting .................. 13 Maintenance ..................14 Specifications ..................
Page 3
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER UTLET, THEN FULLY INSERT. CHANGES OR MODIFICATIONS MADE TO THIS EQUIPMENT, NOT EXPRESSLY APPROVED BY TOSHIBA, OR PARTIES AUTHORIZED BY TOSHIBA, COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Page 4
Interference and recommendations, TOSHIBA believes Bluetooth ® wireless This equipment has been tested and found to comply with the technology is safe for use by consumers.
Page 5
OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
Introduction Safety icons This guide contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Subwoofer (Sample Illustration) Subwoofer connections Item: Description: Functions: Bass port Subwoofer Speaker WIRELESS LINK button Press to pair the subwoofer with the Sound Bar. WIRELESS LINK indicator The indicator is red when the wireless link is activated. POWER switch Switch to turn ON/OFF the subwoofer. Power cord Connects to a standard AC outlet to supply power to the subwoofer.
Remote control Item: Description: Operation: MUTE Press to turn the sound off. Press again to cancel. Press to turn the HDMI ® CEC on/off. VOLUME Press to adjust the volume level. Press to go to the last track or advance PRE/NEXT to the next track in Bluetooth ®...
Page 9
Installing the batteries Install the batteries (AAAx2), matching the polarity indicated inside the battery compartment of the remote control. 1 Open the battery cover. (Sample Illustration) Remote control - Opening the battery cover 2 Insert batteries. Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the battery compartment.
Sound Bar speaker system placement The Sound Bar can be placed freestanding on a table or mounted on a wall. For the best surround sound experience, place your subwoofer as shown below. Place the subwoofer at least 11.8” (300mm) away from the TV. 300mm Sound Bar Subwoofer...
Sound Bar speaker system connections Connecting to a switching power supply (AC Adapter). If you are not going to use the unit for an extended period of time, disconnect the switching power supply (AC Adapter) from the wall outlet. Whenever the switching power supply (AC Adapter) is plugged in to a wall outlet, the switching power supply (AC Adapter) will draw some power, even when the unit is turned off.
Page 12
1. Press the INPUT button to select Bluetooth ® mode until the display is shown “BT”. 2. Once the Sound Bar is detected of your Bluetooth ® enable device. Select the “Toshiba Soundbar” on your device. 3. Enter the PIN code.
Troubleshooting Problem: Solution: The unit does not switch on. Make sure it is plugged in. Turn the subwoofer power switch to ON. No sound from the subwoofer Move the subwoofer closer to the Sound Bar. Ensure the subwoofer is turned on. Turn the subwoofer power switch to ON.
Maintenance Servicing Please refer to relevant topics in “Troubleshooting & Maintenance” on page 13 & 14 before returning the product. If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- servicable parts inside. Turn off, unplug the power plug, and please call our helpline to locate an Authorized Service Center.
Specifications These models comply with the specifications listed below. Designs and specifications are subject to change without notice. These models may not be compatible with features and/or specifications that may be added in the future. Subwoofer: Power requirements AC 120 60Hz Power output 150 watts (at 3 ohms, 100Hz/THD10%)