Related Manuals for IBM UISDMC4S
Summary of Contents for IBM UISDMC4S
- Page 1 USB Card Reader (UISDMC4S) User's Guide INDEX Introduction Installation Guide Specification...
- Page 2 UISDMC4S utilizes the most useful and public USB interface; , and no driver needed under Windows ME/XP; bringing you convenient and high-speed access to a variety of storage cards.
- Page 3 Introduction Features Primary features of the UISDMC4S USB Card Reader include: High-speed(12Mb/s) USB interface access to storage cards. USB bus powered. Supports Hot-Swapping and Mass Storage Class Drive; adopt to native driver provided by Windows ME/XP. With POWER and ACCESS LED indicators.
-
Page 4: Package Contents
Introduction Package Contents Package Contents In the package of USB Card Reader you will find following items:1 Card Reader, 1 USB cable, an d 1 Setup Disc. Please contact your local dealer if there are any shortages. USB Card Reader X 1 USB Cable X 1 Setup Disc X 1... -
Page 5: System Requirements
Introduction System Requirements System Requirements Hardware IBM PC compatible computer with USB support Free 3.5" drive bay Windows 98/98SE/2000 requires device which can read CD-ROM Software Microsoft Windows 98/98SE/ME/2000/XP... - Page 6 Sockets Sockets Refer to following figure and identify the storage card your USB Card Reader supports. CF Socket MS Socket Type I/II CompactFlash Card Memory Stick & IBM Microdrive SD Socket SM Socket SecureDigital & MultiMedia Card 3.3V SmartMedia Card...
- Page 7 Introduction Indicators Indicators Two active LED indicators are used to display operation status of your USB Card Reader. Green - Power Indicator Red - Access Indicator WARNING! Do not insert or extract storage cards while the red LED is flashing.
- Page 8 Installation Attention Guide Attention! On Windows 98/98SE/2000, software setup must be done first, then hardware setup. Windows ME/XP requires no software setup; just connect the reader to you computer then the system will detect the new device. The upper case of the computer must be remove before hardware setup.
-
Page 9: Software Setup
Installation Software Setup Guide Software Setup * You can skip this chapter if your OS is Windows ME/XP. Before connecting the USB Card Reader into USB port, refer to following instructions to install the device driver. 1. Insert Setup Disc into the CD-ROM drive. 2. -
Page 10: Hardware Setup
Installation Hardware Setup Guide Hardware Setup After completing device driver setup for your USB Card Reader and restarting the system, refer to following instructions to install the USB Card Reader. 1. Shut down the computer and remove the power plug. 2. - Page 11 Installation Hardware Setup Guide 4. Re-place the upper case of the reader. Put the reader and the cable into the 3.5" drive bay, then secure the unit with screws. 5. Connect the USB cable to the internal USB connector on the mainborad. About the position and direction of the Internal USB connector, please refer to the manual of your mainboard.
-
Page 12: Using The Reader
Installation Using the Reader Guide Using the Reader Please refer to following instructions to use the reader. 1. Insert your storage card. 2. Open My Computer or File Explorer. 3. Double-click on the proper Removable Disk icon. 4. Access images and files on your storage cards just as the way you open, copy, move, or delete images and files on your hard disk drive. - Page 13 Specification Specification Host Computer IBM PC compatible computer with USB support Windows 98/98SE/ME/2000/XP Sockets 3.3V SmartMedia Card socket X 1 SecureDigital / MultiMedia Card socket X 1 Memory Stick socket X 1 Type I/II CompactFlash Card socket X 1 Interface...