Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
NOTE:
Install all the bolts and nuts first, and then
tighten the bolts and nuts to specifications.
Bracket bolts:
23 Nm (2.3 m • kg, 17 ft • lb)
Mounting bolts:
64 Nm (6.4 m • kg, 46 ft • lb)
2.Tighten:
Bolt 1
Stay bolts (cylinder head-stay):
64 Nm (6.4 m • kg, 46 ft • lb)
Stay bolts (stay-frame):
30 Nm (3.0 m • kg, 22 ft • lb)
3.Install:
Brake pedal 1
Footrest (right) 2
Refer to "ENGINE REMOVAL".
Bolt (brake pedal):
19 Nm (1.9 m • kg, 13 ft • lb)
Bolt (footrest):
64 Nm (6.4 m • kg, 46 ft • lb)
4.Adjust:
Brake pedal height a
Refer to "REAR BRAKE ADJUSTMENT" in
CHAPTER 3.
Brake pedal height:
10 mm (0.39 in)
Below top of footrest
5.Install:
Drive chain (with drive sprocket 1)
Lock washer 2
Nut 3
Refer to "ENGINE REMOVAL".
Nut 3:
110 Nm (11.0 m • kg, 80 ft • lb)
WARNING
Use a new lock washer.
4 - 64
ENG
Advertisement
Table of Contents
