Contents Chapter 1: Before you begin ......................4 Chapter 2: Dust Filter for OptiPlex Micro..................5 Chapter 3: After installing the accessory..................6 Chapter 4: Getting help......................... 7 Contacting Dell..................................7 Contents...
Before you begin Steps 1. Save and close all open files and exit all open applications. 2. Shut down your system: Click Start > Power > Shut down . NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions.
Dust Filter for OptiPlex Micro The dust filter for the OptiPlex 3080 Micro helps protect the system from fine dust particles. After installation, you can set a pre-boot reminder in the BIOS to clean or replace the dust filter at customized time interval using the interval setting in the BIOS.
After installing the accessory Steps 1. Replace all screws and ensure that no stray screws remain. 2. Connect any external devices, peripherals, or cables you removed before working on your system. 3. Connect your system and all attached devices to their electrical outlets. 4.
About this task Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1.