Honeywell Code Encryptor II Installation Manual page 8

Hide thumbs Also See for Code Encryptor II:

Table of Contents

Mandatory Programming Continued

Press and Release button #1

Press and Hold for 3 seconds

NOTE: The Code Encryptor II will arm in the AWAY mode even if you

are outside the house. You do not have to arm the alarm before you

exit. We do however recommend that you Arm the alarm system with-

in sight of the status LED or keypad to verify that the alarm has

received and responded to your remote request.

SEE PAGE 16 FOR DSC 1550 AND CADDX 8980E.

The Code Encryptor II on the following panels self enroll themselves as a specific

keypad address code.

• Ademco addressable

• Moose ZX200/ZX400 addressable

DO NOT USE ANY OF THESE ADDRESS CODES IF YOU ARE USING ONE OF THE

ABOVE PANELS. EXAMPLE: If you are using an Ademco Addressable, no keypads

can use address #3 since the CE II will automatically enroll itself as address #3.

Alarm "Away"

Alarm "Disarm"

Alarm "Stay" or "Bypass"

Address #3

Address #4

Table of Contents