hit counter script
Honeywell OnCell 3150A-LTE-EU Quick Start Manual
Honeywell OnCell 3150A-LTE-EU Quick Start Manual

Honeywell OnCell 3150A-LTE-EU Quick Start Manual

Industrial cellular router

Advertisement

Quick Links

Industrial Cellular Router
OnCell 50A-LTE-EU
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Checking the usage . . . . . . . . . . . . . . . . . . . . . . 2
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Standards and Certifications . . . . . . . . . . . . . . . . 8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
QUICK START GUIDE

Safety

Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
= Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
1
32-00191-01

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell OnCell 3150A-LTE-EU

  • Page 1: Table Of Contents

    Industrial Cellular Router OnCell 50A-LTE-EU QUICK START GUIDE Safety Please read and keep in a safe place Please read through these instructions carefully before installing or operating. Following the installation, pass the instructions on to the opera- tor. This unit must be installed and commissioned in accordance with the regulations and standards in force.
  • Page 2: Checking The Usage

     GPS antenna connector (female SMA) Checking the usage  Terminal block (top-down: PWR1 and PWR2, The OnCell G3150A-LTE is a reliable, secure, LTE 1 digital relay and 2 digital inputs) gateway with state-of-the-art global LTE module. This  Grounding screw (M5) 4G cellular gateway provides a more reliable connec- 2x2 MIMO antenna ports for LTE (female tion to your Ethernet network for cellular applications.
  • Page 3: Installation

    ▷ If the LED indicator on the OnCell G3150A-LTE’s ATTENTION LAN port lights up, it means a connection has – The OnCell G3150A-LTE is NOT a portable mobile been established. device and should be located at least 20 cm away Step : Set up an IP address for the computer from the human body.
  • Page 4: Wiring

     Press the OnCell G3150A-LTE towards the DIN < 6 mm rail  until it snaps into place: < 3.5 mm ▷ Test the screw head and shank size by insert- ing the screws into one of the keyhole shaped apertures of the wall-mounting plates before attaching the plates to the wall.
  • Page 5 ▷ You can use the type of signal transmitted Pinouts for the Power Inputs and Relay Output through a wire to determine which wires should be kept separate. The rule of thumb is that wir- ing with similar electrical characteristics can be bundled together.
  • Page 6 ▷ The relay contacts are used to indicate user- Console Pinouts for 0-Pin or 8-Pin RJ45 configured events. The two wires attached to 0-Pin Description 8-Pin the relay contacts form an open circuit when – a user-configured event is triggered. If a user- configured event does not occur, the relay circuit will be closed.
  • Page 7: Specifications

    1, 10/100 Mbps auto negotiation speed, F/H duplex Function of LEDs Type Color State Description mode and auto MDI/MDI-X connection (RJ45-type). 2G/3G Amber Blinking Serial Console Port: (slow at 1, RS-232 (RJ45-type). GSM/GPRS/EDGE is connected. 500-ms Serial Port: intervals) 1, RS-232, RS-485-4W , RS-485-2W, RS-422 (DB9 UMTS/HSPA is connected.
  • Page 8: Standards And Certifications

    OnCell G3150A-LTE-US: FCC Part 15 Subpart B. OnCell G3150A-LTE-EU: EN 61000-6-2/-4. For More Information The Honeywell Thermal Solutions family of products includes Honeywell Combustion Safety, Eclipse, Exothermics, Hauck, Kromschröder and Maxon. To learn more about our products, visit www.ThermalSolutions.honeywell.com or contact your Honeywell Sales Engineer.

Table of Contents