Table of Contents
Advertisement
GE H
EALTHCARE
D
5394227, 12
IRECTION
3-7-9
Disk encryption
Patient data disk encryption
Bitlocker Drive Encryption uses Advanced Encryption Standard (AES) with configurable key lengths of
256 bits.
To enable disk encryption:
Navigate to Utility > Admin > Disk Encryption.
1.)
Select Encryption On.
2.)
Select Yes to continue.
3.)
4.)
Create a password to use for each Logon after starting system. This is not the user password, this
is system access for all users.
5.)
Recovery key is created, this can be saved to a USB flash drive.
6.)
Insert a USB flash drive in the USB port on the operator panel or monitor to save the key.
Select Save to store the recovery key to the USB flash drive.
7.)
Select Print key to send the key to a print destination.
8.)
Select Show key to write down the key.
9.)
10.) Select Change key if there is a need to create a new key.
NOTE:
DO NOT use the USB media for ANY other storage. This should be used for recovery key
storage ONLY.
11.) Select Save and the recovery key will be displayed one more time.
PROPRIETARY TO GE
Figure 3-18 Disk Encryption Window (Example of R4.2.5x screen)
Figure 3-19 Disk Encryption - Recovery Key Window
Section 3-7 - Power On/Off
LOGIQ S8/LOGIQ E8 S
M
ERVICE
ANUAL
3 - 29
Advertisement
Chapters
Table of Contents
Troubleshooting
