Table of Contents
Advertisement
2. Aper guide position adjustment in the
manual paper feed section
(With the AR-350M/450M, DM-3551/4551,
a scanner installed)
A.Width detection level adjustment in simulations
1) Enter the sub code of SIM 40-7, and the menu below will be
displayed.
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
:
72
2.POSITION 1
:
380
3.POSITION 2
:
710
4.MIN.POSITION
:
804
SIM 40-7: Menu display of width detection level adjustment
2) Under the above state 1), press [1] key and then [START] key, and
the menu below will be displayed.
*
Enter the value of "MAX" specified on the label with [0] - [9] keys.
After entering the value of "MAX," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
1.MAX.POSITION
3) Under the state 1), press [2] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "P1" specified on the label with [0] - [9] keys.
After entering the value of "P1," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
2.POSITION 1
4) Under the state 1), press [3] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "P2" specified on the label with [0] - [9] keys.
After entering the value of "P2," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
3.POSITION 2
5) Under the state 1), press [3] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "MIN" specified on the label with [0] - [9] keys.
After entering the value of "MIN," press CUSTOM SETTINGS key,
and menu (1) will be displayed.
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
4.MIN.POSITION
B. Width detection level adjustment in simulations
1) Enter the sub code of SIM 40-2, and the menu below will be
displayed.
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
2.POSITION 1
3.POSITION 2
4.MIN.POSITION
SIM 40-2: Menu display of width detection level adjustment
2) Under the above state 1), move the manual paper feed guide F to the
MAX position and press [1] key and then [START] key, and the menu
815
below will be displayed. Check that "COMPLETE" is displayed, and
press [CUSTOM SETTING] key to return to the menu 1).
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
MAX.POSITION...COMPLETE
3) Move the manual paper feed guide F to the size mark of A4R on the
manual paper feed tray upper. Press [2] key and then [START] key,
and the menu below will be displayed. Check that "COMPLETE" is
displayed, and press [CUSTOM SETTINGS] key to return to the
menu 1).
80
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
POSITION 1...COMPLETE
4) Move the manual paper feed guide F to the size mark of A5R on the
manual paper feed tray upper. Press [3] key and then [START] key,
and the menu below will be displayed. Check that "COMPLETE" is
displayed, and press [CUSTOM SETTINGS] key to return to the
menu 1).
385
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
POSITION 2...COMPLETE
5) Move the manual paper feed guide F to the MIN position. Press [4]
key and then [START] key, and the menu below will be displayed.
Check that "COMPLETE" is displayed, and press [CUSTOM
SETTINGS] key to return to the menu 1).
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
720
MIN.POSITION...COMPLETE
815
AR-DU3/DU4/TE3 ADJUSTMENTS-2
1
Advertisement
Table of Contents
