Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this product.
WARNING! Use caution when handling and assembling the metal components. The metal may
have sharp edges or corners, the use of protective gloves is recommended.
DO NOT open more than one drawer at a time.
DO NOT step on the drawers.
DO NOT let children play with the roll cab or top chest.
Ensure all drawers are fully closed and the self locking catch is activated, before moving the toolbox.
Secure the brakes when rollcab is in the desired position.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the mounting frame clean and tidy in accordance with good workshop practice.
DO NOT use in damp work areas.
WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood that common
sense and caution are factors which cannot be built into this product, but must be applied by the
operator.
2. INTRODUCTION
AP28104BWS
Retro styled top chest with modern day functionality. Features 4 drawers with 45kg ball
bearing slides and aluminium trimmed lift latch drawer pulls preventing inadvertent opening.
Chest is further enhanced with gas strut supported opening clam shell top providing
additional storage. Retro theme is continued with colour scheme of racing blue with a vinyl
white stripe and recessed chrome side handles. Drawers and top lid are fitted with drawer
liners and lock on one key turn. For use with with AP28206BWS Rollcab and AP28102BWS
Mid-box to make a complete retro style stack unit.
AP28204BWS
Retro styled rollcab with modern day functionality. Features 6 drawers with 45kg ball bearing
slides and aluminium trimmed lift latch drawer pulls preventing inadvertant drawer opening.
Retro theme is continued with colour scheme of racing blue with a vinyl white stripe and styl-
ish heavy duty casters, two with brakes. All drawers are fitted with liners and lock on one key
turn. For use with AP28104BWS Topchest and AP28102BWS Mid-box to make a complete
retro style stack unit.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AP28104BWS . . . . . . . . . . . . AP28204BWS
Overall Dimensions (W x D x H):. . . . . . . . 700 x 450 x 495mm . . . . . . . . 730 x 460 x 825mm
Medium drawer (x 4): . . . . . . . . . . . . . . . . . 570 x 400 x 60mm . . . . . . . . . . . . . . . . . . . . . n/a
Clam Shell Top: . . . . . . . . . . . . . . . . . . . . . . 590 x 430 x 80mm . . . . . . . . . . . . . . . . . . . . n/a
Large drawer (x1): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a . . . . . . . . 570 x 400 x 105mm
Large drawer (x3): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a . . . . . . . . 570 x 400 x 135mm
4. ASSEMBLY
4.1.
Roll Cab Handle Installation.
Position the handle over the holes in the roll cab, attach using the M6 x 12mm hex bolts
and tighten securely (fig.1). Assembling the handle first will make it easier to handle the
the roll cab.
4.2.
Castor Installation.
4.2.1. Lay the roll cab carefully on its back, protecting it with a soft mat placed on the floor.
4.2.2. Position the two rigid castors at the end opposite the handle.
4.2.3. Insert the M8 x 20mm hex bolts through the washers, then through the castors and into
the base of the roll cab, tightening securely.
4.2.4. Repeat with the two swivel castors on the opposite (handle) end.
4.3.
Roll Cab and Top Chest Connection.
4.3.1. Place the top chest onto the roll cab.
4.3.2. Snap the connectors into the square holes on the back of the top chest (fig.3.).
4.3.3. Fasten the connectors with the screws provided.
© Jack Sealey Limited
INSTRUCTIONS FOR:
TOPCHEST 4 DRAWER RETRO, ROLLCAB 4 DRAWER
RETRO - BLUE WITH WHITE STRIPE
AP28104BWS, AP28204BWS
MODEL No's:
Original Language Version
Shown with Mid-box
Model no: AP28102BWS
fig.1
fig.2
fig.3
AP28104BWS, AP28206BWS
Issue: 1 - 16/06/15
Advertisement
Related Manuals for Sealey AP28104BWS
Summary of Contents for Sealey AP28104BWS
- Page 1 Model No: ......AP28104BWS ..
- Page 2 NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. Sole UK Distributor, Sealey Group, www.sealey.co.uk 01284 757500 Kempson Way, Suffolk Business Park, Bury St.