hit counter script
Honeywell Notifier AFP-3030 Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Control Panel
  5. Notifier AFP-3030
  6. Manual

Honeywell Notifier AFP-3030 Manual

Intelligent fire alarm control panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

AFP-3030
Intelligent Fire Alarm Control Panel
GENERAL
The AFP-3030 is an intelligent Fire Alarm Control Panel (FACP)
with a flexible and scaleable architecture which makes it suitable
for virtually any application including large scale networked
facilities. Fire emergency detection and evacuation are extremely
critical to life safety, and the AFP-3030 is ideally suited for these
applications.
The AFP-3030 is part of the ONYX® Series of products from
NOTIFIER. With one to ten Signaling Line Circuits (SLCs), the
AFP-3030 supports up to 3,180 intelligent addressable devices
per panel and is networkable up to 200 nodes.
A host of other options are available, including single-
or multichannel voice; LED, LCD, or PC-based graphic
annunciators; networking; advanced detection products for
challenging environments, and many additional options.
Connectivity with a range of NOTI•FIRE•NET™ integration
options
such
as
Bacnet,
Notifier WebServer (NWS-3) permit the AFP-3030 and
NOTI•FIRE•NET™ to integrate into critical component building
management systems.
FEATURES
•
One to ten isolated intelligent Signaling Line Circuits
•
Up to 159 detectors and 159 modules per SLC, 318
devices per loop / 3,180 per FACP (or network node)
•
Detectors can be any mix of ionization, photo, laser
photo, thermal, or multi-criteria detectors; modules
can be addressable manual call points, normally open
contact devices, two-wire smoke detectors, notification,
relay or 4-20 mA modules
•
Large 640-character LCD backlit displayor display-less
(a node on a network)
•
Network up to 200 nodes with high-speed Noti-Fire-Net
•
VeriFire Tools non-proprietary online/offline program, test
and reporting PC software.
•
Weekly Occupancy Schedules allow changing sensitivity
by time of day and day of week
•
With built-in SLC Local mode operation; the system is
capable of activating sounders and relays if a fire alarm
condition is present even if the central processing unit
(CPU) fails
•
Range of annunciators for ancillary display & control
Modbus,
OnyxWorks
and
AFP-3030 in CAB-900 and CAB650
•
History file with 4000-event capacity plus separate
1000-event alarm-only file
•
Advanced history filters allow sorting by event, time,
date, or address
•
Alarm Verification Facility (AVF) selection per point, with
automatic counter
•
Auto-programming and Walk Test reports
•
Alarm delay operation
•
Field-programmable on panel with QWERTY keypad
•
Non-alarm points for lower priority functions
•
Remote Silence, System Reset, Evacuate via monitor
modules
•
Support for AS1668.1 compliant smoke control with
SCS Series smoke control system
Intelligent Fire Systems
DOC-02-159:rev C - Page 1 of 8

Advertisement

Table of Contents
loading

Related Manuals for Honeywell Notifier AFP-3030

Summary of Contents for Honeywell Notifier AFP-3030

  • Page 1 AFP-3030 Intelligent Fire Alarm Control Panel Intelligent Fire Systems GENERAL The AFP-3030 is an intelligent Fire Alarm Control Panel (FACP) with a flexible and scaleable architecture which makes it suitable for virtually any application including large scale networked facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the AFP-3030 is ideally suited for these applications.
  • Page 2 Display Features FSC-851AUS IntelliQuad™ Advanced Multi-Criteria Detector • Large LCD Display: 640 characters (16 lines x 40 • Detects all four major elements of a fire (smoke, heat, characters) with long-life LED backlight CO, and flame) • Program keypad: full QWERTY keypad for field •...
  • Page 3 FLASHSCAN® Alarm Verfication Facility (AVF). All devices are capable of performing WORLD LEADING DETECTOR PROTOCOL an alarm verification facility, whereby communication between the panel and the device performs an additional confirmation of an alarm event in At the heart of the AFP-3030 is a set of detection devices and device order to reduce unwanted spurious alarms.
  • Page 4 PRODUCT LINE INFORMATION DA-DISP/A, DA-DISP/B, DA-DISP/C, DA-DISP/D, DA-DISP/E: Display control and paging microphone modules for DA series amplifiers. Main System Components See DOC-02-066. CPU2-3030AU: AFP-3030 central processing unit including field SDM-4: 4 way Speaker distribution module for use with DA series interfaces.
  • Page 5 DNR: InnovairFlex low-flow non-relay duct-detector housing (order FSP- Enclosures, Chassis and Dress Plates 851 separately). See DOC-02-098. CAB Series Enclosures: AFP-3030 mounts in a standard CAB Series DNRW: Same as above with NEMA-4 rating, watertight. See DOC-02- enclosure (available in two sizes, CAB650 and CAB900). The CAB series 098.
  • Page 6 Intelligent Detectors Addressable Modules FAPT-851AUS NFX-MCP FSP-851AUS FRM-1 FSL-751 XP6-C ..etc ..etc 3 Notification Appliance Circuits (NACs) For devices such as sounders, strobes and bells LCD2-80 3 Programmable Relay Outputs LCD Remote Display Door Holder Output SCS-8A LDM-32 ACM-24AT/ACM-48A ACS Annunciators Module Smoke Control Custom LED mimic Station ACM-8RA Relay Expansion Module DA-30/60/120 DA Series Occupant...
  • Page 7 SPECIFICATIONS System Capacity • Intelligent Signaling Line Circuits .....1 expandable to 10 • Intelligent detectors ..........159 per SLC • Addressable monitor/control modules ....159 per SLC • Programmable software zones........ over 2000 • ACS annunciators per CPU..32 address x 64 or 96 points NOTE: The CPU2-3030AU can support up to 96 annunciator address points per ACM-24AT/48A.
  • Page 8 All specifications are subject to www.notifier.com.au | www.notifier.co.nz change without notice. ISO9001 © 2015 Honeywell International Inc. All rights reserved. Unauthorized use FS 520324 of this document is strictly prohibited. ENGINEERING & MANUFACTURING QUALITY SYSTEMS...

  • Page 9: Annunciator Modules

    Annunciator Modules ACM-16AT, ACM-32A, LDM-32 & LDM-R32 Intelligent/Addressable Devices General The Notifier ACS Series Annunciators provide a modular line of products for annunciation and control. ACM-16AT These may be used for isolate/de-isolate functions or as test switches for solenoids or any switchable devices. Features •...
  • Page 10 LDM-R32 © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate.
  • Page 11 DNR(W) InnovairFlex Intelligent Duct Smoke Detector Intelligent Devices GENERAL The Notifi er InnovairFlex DNR-AUS intelligent photo-electric duct smoke detector and DNRW-AUS watertight non-relay photoelectric duct smoke detector feature a pivoting housing that fi ts both square and rectangular footprints capable of mounting to a round or rectangular duct.
  • Page 12 All specifi cations are subject to change without notice. www.notifi er.com.au | www.notifi er.co.nz ISO9001 © 2015 Honeywell Ltd FS 520324 ENGINEERING & MANUFACTURING QUALITY SYSTEMS DOC-02-098:rev B - Page 2 of 2...

  • Page 13: Control Module

    FCM-1 Control Module Intelligent/Addressable Devices General The FCM-1 Addressable Control Module provides Notifier intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.) Addressability allows the FCM-1 to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.

  • Page 14: Specifications

    Ordering Information FG-05-024 FCM-1 Single intelligent control (monitored output) module © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate.
  • Page 15 FDX-851AUS Series Thermal (Heat) Detectors Intelligent/Addressable Devices General Notifier FDX-851AUS Series CLIP intelligent plug-in thermal detectors with integral communication has features that surpass conventional detectors. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations.
  • Page 16 FDX851AUS CLIP fixed thermal detector FG-03-007 FDX851RAUS CLIP rate-of-rise thermal detector © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate.

  • Page 17: Relay Module

    FRM-1 Relay Module Intelligent/Addressable Devices General The FRM-1 Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis.
  • Page 18 Ordering Information FG-05-025 FRM-1 Single intelligent relay output module © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate.
  • Page 19 FSB-200 Series Reflected Beam Sensors Intelligent/Addressable Devices General The Notifier FSB-200 and FSB-200S are intelligent, addressable reflected beam smoke detectors for protecting open areas with high and sloping ceilings, and wide-open areas, where spot-type smoke detectors are difficult to install and maintain.
  • Page 20 BEAMLRK Long range kit (70m - 100m) FG-01-067 RTS451Key Remote test station with key lock © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes.
  • Page 21 FSP-851AUS Photelectric Smoke Detector Intelligent/Addressable Devices General Notifier 851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector location for selective...

  • Page 22: Electrical Specifications

    Ordering Information FG-03-011 FSP-851AUS FlashScan Photo-optical Sensor © 2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited. This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate.

Table of Contents