Table of Contents
Advertisement
If you need to remove a disc and cannot turn on the computer (for
example, if the battery is completely discharged), use a narrow
object, such as a straightened paper clip, to press the manual eject
button. This button is in the small hole next to the optical drive eject
button on the face of the optical drive tray.
Some discs run correctly but others do not.
Check that the type of disc you are using is compatible with your
optical drive. For more information regarding supported optical
media formats, refer to the complete detail specifications for your
computer at pcsupport.toshiba.com.
If the problem is with a data optical disc, refer to the software's
documentation and check that the hardware configuration meets the
program's needs.
The disc will not come out of the drive when you click the
eject button on the screen.
Press the button on the optical drive itself. For additional
information see
does not slide out." on page
Sound system problems
No sound is coming from the computer's speakers.
Adjust the volume control.
Try pressing
Check to see if the volume control on the computer is turned up.
If you are using external headphones or speakers, check that they
are securely connected to your computer.
The computer emits a loud, high-pitched noise.
This is feedback between the microphone and the speakers. It
occurs in any sound system when input from a microphone is fed to
the speakers and the speaker volume is too loud. Adjust the volume
control.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
"You press the disc eject button, but the drive tray
to see if volume mute is disabled.
Fn + Esc
If Something Goes Wrong
Resolving a hardware conflict
168.
169
Advertisement
Table of Contents
