Epson SC-R5000 Series User Manual page 110
Hide thumbs
Also See for SC-R5000 Series:
- Setup manual (41 pages) ,
- Repair manual (24 pages) ,
- Service manual (19 pages)
Table of Contents
Advertisement
SC-R5000 Series/SC-R5000L Series User's Guide
Item
Job Connection
Media Detection
Width Detection
Media Width
End Detection
Detect Paper Skew
Nozzle Check between Pages
On
Print Page
*
Off
Control Panel Menu
Parameter
Explanation
*
When this is set to On, the next job starts printing without performing
On
operations, such as feeding media through the curing heater or
rewinding the media after curing, between continuous print jobs. There
Off
are no operations between jobs so printing time is that much shorter.
Continuous print jobs are a series of jobs in which the print job data is
sent from the computer to the printer as soon as the previous print job
data has been sent from the computer and received by the printer. If
the pass mode is different between the previous print job and the next
print job, the jobs are not connected.
*
Select whether the media width is detected (On) or not (Off). Try
On
setting Off when printing if media width errors are displayed even
though the media is correctly loaded. However, we recommend setting
Off
this to On when using the printer. Changed settings are reflected when
the media is reloaded.
300 to 1625.6 mm
When Width Detection is Off, the value of the media width must be set
*
correctly according to the width of the media loaded in this setting.
(300
)
(11.81 to 64.00
If the correct media width is not set, the printer may print beyond the
inches [11.81*])
edges of the media. Ink used outside the edges of the media will stain
the inside of the printer.
*
Select whether or not (On/Off) the end of the media is detected. Try
On
setting Off when printing if media out errors are displayed even though
Off
the media is correctly loaded. We recommend this normally be set to
On when using the printer.
On
Select whether the printer will stop printing and display an error (On) or
whether the printer will continue printing (Off) when skewed media is
*
Off
detected. On is recommended in most circumstances, as skewed media
may cause the printer to jam.
When On is set, a nozzle check pattern is printed periodically at the
specified timing. When printing is complete, you can visually inspect
Each 1 to 9999 pages
the check pattern to determine whether there are any stripes or
unevenness in the preceding or following printout.
Print Page sets the timing at which check patterns are printed.
110
- Quick Links:
- Table of Contents
- Illustrations
Hide quick links:
Advertisement
Chapters
Table of Contents
