hit counter script

Cleaning And Storage - Honeywell InSight Series Owner's Manual

Hepa air purifier
Hide thumbs Also See for InSight Series:
Table of Contents

Advertisement

Available languages

Available languages

FILTER REPLACEMENT
*For specific filter models, reference the Replacement Filters section of this manual (Page 4).
See the Getting Started section for filter replacement instructions (Page 5).
To ensure stated product performance, use only Certified Honeywell Replacement Filters. You can purchase
Genuine Honeywell Filters at the retailer where you purchased your air purifier or order directly from
www.HoneywellPluggedIn.com.
These replacement intervals are intended as guidelines only. Performance of any filter media is dependent upon
the concentration of contaminants going through the system. High concentrations of contaminants such as dust,
pet dander, and smoke will reduce the useful performance of the filters.
NOTE: The Pre-Filter, Enhanced Odor & VOC Filter and HEPA Filters are not washable and should not be vacuumed.
DO NOT immerse them in water.
RESET FILTER CHECK INDICATOR
After you have replaced the appropriate filters, plug the unit back in. The Pre-Filter/Enhanced Odor and VOC Filter
and/or HEPA Filter Reset Light will remain on until it is reset.
Pre-Filter and Enhanced Odor & VOC Filter Reset:
• With the unit powered off, press the Filter Reset button
The Pre-Filter/Enhanced Odor & VOC Filter indicator light will blink twice to indicate the timer
has been reset and will then turn off.
HEPA Filter Reset:
• With the unit powered off, press and hold the Filter Reset button
indicator light will blink twice to indicate the timer has been reset and will then turn off.

CLEANING AND STORAGE

We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use only
a dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we recommend that you:
• Remove the HEPA Filters from the unit.
• Wrap the HEPA Filters in an air tight plastic bag.
• Remove the Pre-Filter and Enhanced Odor and VOC Filters and place them in an air tight plastic bag.
2 times within one second.
8
(continued)
for two seconds. The HEPA Filter

Advertisement

Table of Contents
loading

Table of Contents

Save PDF