SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Settings item
Advanced
Device Name
TCP/IP
Proxy Server
Email Server (SC-T3100M Series only)
Shared Folder (SC-T3100M Series only)
IPv6 Address
Link Speed & Duplex
Redirect HTTP to
HTTPS
Disable IPsec/IP Fil-
tering
Disable IEEE802.1X
iBeacon Transmis-
sion (SC-T3100M Ser-
ies only)
General Settings - Scan Settings (SC-T3100M Series only)
*Default setting
Using the Menu
Settings value
*
Auto
Manual
Use
*
Do Not Use
*
Enable
Disable
*
Auto
10BASE-T Half Duplex
10BASE-T Full Duplex
100BASE-TX Half Duplex
100BASE-TX Full Duplex
*
Enable
Disable
Enable
*
Disable
Enable
*
Disable
*
Enable
Disable
Explanation
Set the name of the printer to use on the network.
Automatically assign the printer IP address using DHCP
functionality in the router.
Select this to manually assign a fixed IP address, then input the IP
address, subnet mask, and other required information.
For details, see the Administrator's Guide.
When using a proxy server to directly connect from the intranet to
the Internet so that the printer may directly access the Internet for
firmware updates or similar, select Use, and set the server name and
port number.
The details are the same as displayed in General Settings - Scan
Settings - Email Server.
Used when you want to print from a folder. You must set up a
shared folder before printing from a folder.
"Printing Files from a Shared Folder (Print from Folder) (SC-
U
T3100M Series Only)" on page 98
Select whether to enable or disable the IPv6 function.
Normally, set this to Auto.
Select whether to enable or disable the function to auto-redirect
HTTP to HTTPS.
To enable IPsec/IP filtering functionality, use Web Config.
For details, see the Administrator's Guide.
To enable IEEE802.1X functionality, use Web Config.
For details, see the Administrator's Guide.
Set whether to enable or disable iBeacon Transmission. Set to
enable to be able to search from iBeacon-compatible devices.
152