Connect Chassis To Network - Cisco ASR 920 Series Manual

Hide thumbs Also See for ASR 920 Series:

Configuration manual ethernet router (438 pages)

Installing manual (74 pages)

Configuration manual (68 pages)

Table of Contents

Installing the Cisco ASR 920 Series Router

3. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

4. If you are also connecting a redundant DC power supply, repeat these steps for the second power source.

DETAILED STEPS

Step 1

Remove the tape from the circuit-breaker device handle, and restore power by moving the circuit-breaker device handle

to the On (|) position.

Step 2

Verify the power supply operation by ascertaining that the front panel LED is green.

Step 3

If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

Step 4

If you are also connecting a redundant DC power supply, repeat these steps for the second power source.

Note

When you connect a redundant DC power supply, ensure that each power supply is connected to a separate

power source to prevent power loss during a failure.

Activate AC Power Supply

SUMMARY STEPS

1. Plug the power cord into the power supply.

2. Connect the other end of the power cord to an AC-input power source.

3. Verify the power supply operation by ascertaining that the front panel LED is green.

4. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

5. If you are also connecting a redundant AC power supply, repeat these steps for the second power source.

DETAILED STEPS

Step 1

Plug the power cord into the power supply.

Step 2

Connect the other end of the power cord to an AC-input power source.

Step 3

Verify the power supply operation by ascertaining that the front panel LED is green.

Step 4

If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

Step 5

If you are also connecting a redundant AC power supply, repeat these steps for the second power source.

Note

When you connect a redundant AC power supply, ensure that each power supply is connected to a separate

power source to prevent power loss during failure.